Effects of measurement parameters on VOCs concentration in the sampling bag

Kouichi Tatsu, Shin Ichi Tanabe

研究成果: Article査読

抄録

For the improvement of the air quality of indoors, it is necessary to determine the kinds and the concentration of the chemical substances that emit from building products and production parts. On this study, the heating temperature, the amount of the nitrogen filling, and the heating time, etc. was executed as an important item related to the measurement of bag method. It was a tendency that the recovery percentage raises with the rise of the heating temperature as a result of examining the recovery percentage by using the standard test solution, too. Therefore, 65 degrees of the heating temperature is preferable. However, the recovery percentage is less than 80% at even 65 degrees in heating temperature, and it has been understood that it is unsuitable in the measurement in the bag method in Tetradecan. In addition, it has been understood that the bag value calculated from the chamber method becomes small more than the bag value calculated from the bag method.

本文言語English
ページ(範囲)79-85
ページ数7
ジャーナルJournal of Environmental Engineering
75
647
DOI
出版ステータスPublished - 2010 1

ASJC Scopus subject areas

  • 環境工学

フィンガープリント

「Effects of measurement parameters on VOCs concentration in the sampling bag」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル