Effects of quantity and size of silicon particle on lubricating characteristics of particle-dispersed aluminum sintered materials

Kenichi Tsuru, Susumu Matsumoto

研究成果: Article査読

1 被引用数 (Scopus)

抄録

The tests for sliding characteristic of sintered aluminum with retained oil for sliding bearing were conducted . The sintered aluminum materials blended of silicon with 40wt% weight in maximum were made for experiments. Results obtained are as follows. There was the relation among the oil content, the radial crushing strength and the hardness. There was the limitation of mean grain size and weight fraction of silicon for the higher quantity of oil and the higher mechanical properties. In that condition, the hardness increased with the quantity of retained oil in subsurface of tested rings.

本文言語English
ページ(範囲)869-874
ページ数6
ジャーナルZairyo/Journal of the Society of Materials Science, Japan
59
11
DOI
出版ステータスPublished - 2010 11

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanical Engineering
  • Mechanics of Materials
  • Condensed Matter Physics

フィンガープリント 「Effects of quantity and size of silicon particle on lubricating characteristics of particle-dispersed aluminum sintered materials」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル