Elasto-Plastic-Creep Constitutive Equation of an Al-Si-Cu High-Pressure Die Casting Alloy for Thermal Stress Analysis

Yuichi Motoyama*, Hidetoshi Shiga, Takeshi Sato, Hiroshi Kambe, Makoto Yoshida

*この研究の対応する著者

    研究成果: Article査読

    4 被引用数 (Scopus)

    抄録

    Accurate simulation of residual stress and deformation is necessary to optimize the design and lifetime of casting components. Therefore, the recovery and strain-rate dependence of the stress–strain curve have been incorporated into empirical constitutive equations to improve the thermal stress analysis accuracy. Nevertheless, these equations present several difficulties related to the determination of material constants and their physical bases. This study suggested an empirical elasto-plastic-creep constitutive equation incorporating these phenomena. To determine the material parameters used in this constitutive equation, this study investigated tensile test methods to obtain stress–strain curves that most closely resemble those during or immediately after casting for the Al-Si-Cu high-pressure die-casting alloy JIS ADC 12 (A383.0), which exhibits natural aging. Results show that solution heat treatment with subsequent cooling to the test temperature should be applied to obtain stress–strain curves used for the thermal stress analysis of high-pressure die casting process of this alloy. The yield stresses obtained using the conventional heating method were 50-64 pct higher than those of the method described above. Therefore, the conventional method is expected to overestimate the overestimation of the predicted residual stress in die castings. Evaluation of the developed equation revealed that it can represent alloy recovery and strain-rate dependence.

    本文言語English
    ページ(範囲)5598-5608
    ページ数11
    ジャーナルMetallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
    47
    11
    DOI
    出版ステータスPublished - 2016 11 1

    ASJC Scopus subject areas

    • 材料科学(全般)
    • 凝縮系物理学
    • 材料力学
    • 金属および合金

    フィンガープリント

    「Elasto-Plastic-Creep Constitutive Equation of an Al-Si-Cu High-Pressure Die Casting Alloy for Thermal Stress Analysis」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル