Electrically driven varifocal micro lens fabricated by depositing parylene directly on liquid

Binh Khiem Nguyen*, Eiji Iwase, Kiyoshi Matsumoto, Isao Shimoyama

*この研究の対応する著者

研究成果: Conference contribution

25 被引用数 (Scopus)

抄録

The design and fabrication process of an electrically-driven varifocal liquid microlens are reported with experimental measurement results and a theoretical calculation model. Droplets of oil are sandwitched between a glass wafer and a thin-film of parylene chemical vapor deposited (CVD) directly onto the droplets' liquid surface. A method for creating fluid-filled micro chambers was realized with two core steps: 1) placing-shaping of oil drop-lets with hydrophobic/hydrophilic patterns and 2) coating them with a thin CVD parylene film in high vacuum condition. Liquid lenses and lens arrays of diameter from 20μm to 10mm were fabricated. In the tuning experiment, focal length was shortened to 20% of its initial value, from 3.8mm to 0.8mm. The values calculated from model match the data collected from experiments within the range of applied voltage from 0V to 150V.

本文言語English
ホスト出版物のタイトルProceedings - CIS Workshops 2007, 2007 International Conference on Computational Intelligence and Security Workshops, CISW 2007
ページ305-308
ページ数4
出版ステータスPublished - 2007
外部発表はい
イベント20th IEEE International Conference on Micro Electro Mechanical Systems, MEMS 2007 - Kobe, Japan
継続期間: 2007 1月 212007 1月 25

出版物シリーズ

名前Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)
ISSN(印刷版)1084-6999

Conference

Conference20th IEEE International Conference on Micro Electro Mechanical Systems, MEMS 2007
国/地域Japan
CityKobe
Period07/1/2107/1/25

ASJC Scopus subject areas

  • 電子材料、光学材料、および磁性材料
  • 凝縮系物理学
  • 機械工学
  • 電子工学および電気工学

フィンガープリント

「Electrically driven varifocal micro lens fabricated by depositing parylene directly on liquid」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル