Electrodeposition of Pt-Ir alloys on nickel-base single crystal superalloy TMS-75

Feng Wu, Hideyuki Murakami, Yoko Yamabe-Mitarai, Hiroshi Harada, Hideki Katayama, Yoshinobu Yamamoto

研究成果: Article

33 被引用数 (Scopus)

抄録

Platinum-iridium alloy coatings from amidosulfuric acid solutions have successfully been electrodeposited on nickel-base single crystal superalloy TMS-75 by direct current method. The effects of electrolyte temperature, current density and mole concentration ratios of [Ir3+]/([PtCl62-]+ [Ir3+]), on the deposition rate, composition and crystallographic structures of Pt-Ir alloy coatings are investigated. It is found that with increasing electrolyte temperature, deposition rate and Ir content increase, whereas the grain size of Pt-Ir alloy coatings decreases. Smooth and dense Pt-Ir alloy coatings can be obtained at 1 A/dm2 and 353 K. Pt-Ir alloy coatings with expected compositions can be readily fabricated by controlling the mole concentration ratios of [Ir3+]/([PtCl62-] +[Ir3+]) in the electrolyte. A detailed investigation of the structure and morphology of electrodeposited Pt-Ir alloy coatings is also presented. XRD analysis revealed that all the coated Pt-Ir alloys have a single phase with f.c.c structure, and the lattice parameters of the coatings decrease linearly with increasing Ir content, suggesting that the coated Pt-Ir alloy system follows the Vegard's law.

本文言語English
ページ(範囲)24-30
ページ数7
ジャーナルSurface and Coatings Technology
184
1
DOI
出版ステータスPublished - 2004 6 1
外部発表はい

ASJC Scopus subject areas

  • Chemistry(all)
  • Condensed Matter Physics
  • Surfaces and Interfaces
  • Surfaces, Coatings and Films
  • Materials Chemistry

フィンガープリント 「Electrodeposition of Pt-Ir alloys on nickel-base single crystal superalloy TMS-75」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル