Evaluation of the mechanical properties of PMC interface using slice compression test - analysis of transfer mechanism of interfacial shear stress

Norihiko Taniguchi, Kunihiro Toge, Hiroyuki Kawada*

*この研究の対応する著者

研究成果: Conference article査読

2 被引用数 (Scopus)

抄録

Properties of the fiber/matrix interface in SiO2/epoxy and SiC/epoxy composite are investigated using the slice compression test (SCT) for the single fiber, where the specimen is loaded and unloaded between a plate which has different mechanical properties. It is found that the interfacial debonding proceeds from the polished surface at a soft plate side and that the fiber protrusion occurs after unloading. The fiber-protrusion length is directly measured at each applied stress level using a scanning electron microscope. Interfacial shear-sliding stress is obtained based on the constant shear-sliding stress analysis employing the obtained protrusion length. It is demonstrated that the value of interfacial shear-sliding stress shows good agreement with that obtained from another technique, the push-out test, on the same system. The relation between the fiber-protrusion length and applied stress is proportional to a certain extent. From this result, it is analytically pointed out that the applied stress has a limiting value in this SCT because of Poisson's effect. Also, two interfacial debonding criteria, which are determined analytically for the PMC, are discussed.

本文言語English
ページ(範囲)349-361
ページ数13
ジャーナルComposite Interfaces
7
5-6
DOI
出版ステータスPublished - 2001
イベント7th Symposium on Intrfacial Material Science of Composites - Tokyo, Japan
継続期間: 1999 4 261999 4 28

ASJC Scopus subject areas

  • セラミックおよび複合材料
  • 物理学および天文学(全般)
  • 表面、皮膜および薄膜

フィンガープリント

「Evaluation of the mechanical properties of PMC interface using slice compression test - analysis of transfer mechanism of interfacial shear stress」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル