Examination of a stereoscopic 3-D display system using a correction lens

Takashi Kawai, Takashi Shibata, Keiji Ohta, Yoshihiro Yoshihara, Tetsuri Inoue, Tsuneto Iwasaki

    研究成果: Conference contribution

    7 引用 (Scopus)

    抄録

    This paper describes an examination of a stereoscopic 3-D display system using a correction lens. The purpose of the system is to reduce the accommodation and convergence difference during viewing stereoscopic 3-D images by using simple technique. This correction lens is a mono-focal lens, and added to the polarized filter glasses. In this study, the authors carried out three experiments in order to examine the appropriate utilization conditions and effects of the correction lens. In experiment 1, the refractive power of correction lens was examined under six conditions in which distances of accommodation and convergence were theoretically equal. In experiment 2, the presenting condition of stereoscopic 3-D images suitable for the correction lens was examined by measurement of refractions during viewing visual target that moved in depth direction. In experiment 3, the effectiveness of the correction lens was examined by using the utilization conditions obtained in experiment 1 and 2. From the results of the experiments, the following conclusions were drawn. (1) Correction lenses shift the accommodation distance. (2) Using a correction lens with the appropriate refractive power and setting the appropriate conditions for presenting stereoscopic 3-D images reduced the difference between accommodation and convergence. (3) The use of a correction lens affected the subjective symptoms of asthenopia.

    元の言語English
    ホスト出版物のタイトルProceedings of SPIE - The International Society for Optical Engineering
    編集者A.J. Woods, M.T. Bolas, J.O. Merritt, S.A. Benton
    ページ254-262
    ページ数9
    5006
    DOI
    出版物ステータスPublished - 2003
    イベントStereoscopic Displays and Virtual Reality Systems X - Santa Clara, CA, United States
    継続期間: 2003 1 212003 1 24

    Other

    OtherStereoscopic Displays and Virtual Reality Systems X
    United States
    Santa Clara, CA
    期間03/1/2103/1/24

    Fingerprint

    display devices
    Lenses
    examination
    Display devices
    lenses
    accommodation
    Experiments
    asthenopia
    Refraction
    refraction
    filters
    Glass
    glass
    shift

    ASJC Scopus subject areas

    • Electrical and Electronic Engineering
    • Condensed Matter Physics

    これを引用

    Kawai, T., Shibata, T., Ohta, K., Yoshihara, Y., Inoue, T., & Iwasaki, T. (2003). Examination of a stereoscopic 3-D display system using a correction lens. : A. J. Woods, M. T. Bolas, J. O. Merritt, & S. A. Benton (版), Proceedings of SPIE - The International Society for Optical Engineering (巻 5006, pp. 254-262) https://doi.org/10.1117/12.474154

    Examination of a stereoscopic 3-D display system using a correction lens. / Kawai, Takashi; Shibata, Takashi; Ohta, Keiji; Yoshihara, Yoshihiro; Inoue, Tetsuri; Iwasaki, Tsuneto.

    Proceedings of SPIE - The International Society for Optical Engineering. 版 / A.J. Woods; M.T. Bolas; J.O. Merritt; S.A. Benton. 巻 5006 2003. p. 254-262.

    研究成果: Conference contribution

    Kawai, T, Shibata, T, Ohta, K, Yoshihara, Y, Inoue, T & Iwasaki, T 2003, Examination of a stereoscopic 3-D display system using a correction lens. : AJ Woods, MT Bolas, JO Merritt & SA Benton (版), Proceedings of SPIE - The International Society for Optical Engineering. 巻. 5006, pp. 254-262, Stereoscopic Displays and Virtual Reality Systems X, Santa Clara, CA, United States, 03/1/21. https://doi.org/10.1117/12.474154
    Kawai T, Shibata T, Ohta K, Yoshihara Y, Inoue T, Iwasaki T. Examination of a stereoscopic 3-D display system using a correction lens. : Woods AJ, Bolas MT, Merritt JO, Benton SA, 編集者, Proceedings of SPIE - The International Society for Optical Engineering. 巻 5006. 2003. p. 254-262 https://doi.org/10.1117/12.474154
    Kawai, Takashi ; Shibata, Takashi ; Ohta, Keiji ; Yoshihara, Yoshihiro ; Inoue, Tetsuri ; Iwasaki, Tsuneto. / Examination of a stereoscopic 3-D display system using a correction lens. Proceedings of SPIE - The International Society for Optical Engineering. 編集者 / A.J. Woods ; M.T. Bolas ; J.O. Merritt ; S.A. Benton. 巻 5006 2003. pp. 254-262
    @inproceedings{44fd0d025a364e919c6cc941f9ec0862,
    title = "Examination of a stereoscopic 3-D display system using a correction lens",
    abstract = "This paper describes an examination of a stereoscopic 3-D display system using a correction lens. The purpose of the system is to reduce the accommodation and convergence difference during viewing stereoscopic 3-D images by using simple technique. This correction lens is a mono-focal lens, and added to the polarized filter glasses. In this study, the authors carried out three experiments in order to examine the appropriate utilization conditions and effects of the correction lens. In experiment 1, the refractive power of correction lens was examined under six conditions in which distances of accommodation and convergence were theoretically equal. In experiment 2, the presenting condition of stereoscopic 3-D images suitable for the correction lens was examined by measurement of refractions during viewing visual target that moved in depth direction. In experiment 3, the effectiveness of the correction lens was examined by using the utilization conditions obtained in experiment 1 and 2. From the results of the experiments, the following conclusions were drawn. (1) Correction lenses shift the accommodation distance. (2) Using a correction lens with the appropriate refractive power and setting the appropriate conditions for presenting stereoscopic 3-D images reduced the difference between accommodation and convergence. (3) The use of a correction lens affected the subjective symptoms of asthenopia.",
    keywords = "Accommodation convergence difference, Correction lens, Stereoscopic 3-D images",
    author = "Takashi Kawai and Takashi Shibata and Keiji Ohta and Yoshihiro Yoshihara and Tetsuri Inoue and Tsuneto Iwasaki",
    year = "2003",
    doi = "10.1117/12.474154",
    language = "English",
    volume = "5006",
    pages = "254--262",
    editor = "A.J. Woods and M.T. Bolas and J.O. Merritt and S.A. Benton",
    booktitle = "Proceedings of SPIE - The International Society for Optical Engineering",

    }

    TY - GEN

    T1 - Examination of a stereoscopic 3-D display system using a correction lens

    AU - Kawai, Takashi

    AU - Shibata, Takashi

    AU - Ohta, Keiji

    AU - Yoshihara, Yoshihiro

    AU - Inoue, Tetsuri

    AU - Iwasaki, Tsuneto

    PY - 2003

    Y1 - 2003

    N2 - This paper describes an examination of a stereoscopic 3-D display system using a correction lens. The purpose of the system is to reduce the accommodation and convergence difference during viewing stereoscopic 3-D images by using simple technique. This correction lens is a mono-focal lens, and added to the polarized filter glasses. In this study, the authors carried out three experiments in order to examine the appropriate utilization conditions and effects of the correction lens. In experiment 1, the refractive power of correction lens was examined under six conditions in which distances of accommodation and convergence were theoretically equal. In experiment 2, the presenting condition of stereoscopic 3-D images suitable for the correction lens was examined by measurement of refractions during viewing visual target that moved in depth direction. In experiment 3, the effectiveness of the correction lens was examined by using the utilization conditions obtained in experiment 1 and 2. From the results of the experiments, the following conclusions were drawn. (1) Correction lenses shift the accommodation distance. (2) Using a correction lens with the appropriate refractive power and setting the appropriate conditions for presenting stereoscopic 3-D images reduced the difference between accommodation and convergence. (3) The use of a correction lens affected the subjective symptoms of asthenopia.

    AB - This paper describes an examination of a stereoscopic 3-D display system using a correction lens. The purpose of the system is to reduce the accommodation and convergence difference during viewing stereoscopic 3-D images by using simple technique. This correction lens is a mono-focal lens, and added to the polarized filter glasses. In this study, the authors carried out three experiments in order to examine the appropriate utilization conditions and effects of the correction lens. In experiment 1, the refractive power of correction lens was examined under six conditions in which distances of accommodation and convergence were theoretically equal. In experiment 2, the presenting condition of stereoscopic 3-D images suitable for the correction lens was examined by measurement of refractions during viewing visual target that moved in depth direction. In experiment 3, the effectiveness of the correction lens was examined by using the utilization conditions obtained in experiment 1 and 2. From the results of the experiments, the following conclusions were drawn. (1) Correction lenses shift the accommodation distance. (2) Using a correction lens with the appropriate refractive power and setting the appropriate conditions for presenting stereoscopic 3-D images reduced the difference between accommodation and convergence. (3) The use of a correction lens affected the subjective symptoms of asthenopia.

    KW - Accommodation convergence difference

    KW - Correction lens

    KW - Stereoscopic 3-D images

    UR - http://www.scopus.com/inward/record.url?scp=0041358644&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=0041358644&partnerID=8YFLogxK

    U2 - 10.1117/12.474154

    DO - 10.1117/12.474154

    M3 - Conference contribution

    AN - SCOPUS:0041358644

    VL - 5006

    SP - 254

    EP - 262

    BT - Proceedings of SPIE - The International Society for Optical Engineering

    A2 - Woods, A.J.

    A2 - Bolas, M.T.

    A2 - Merritt, J.O.

    A2 - Benton, S.A.

    ER -