EXPERIMENTAL BIDIRECTIONAL SUBSCRIBER LOOP TRANSMISSION SYSTEM.

TETSUO SOEJIMA, TOSHITAKA TSUDA, HARUO OGIWARA

    研究成果: Article査読

    5 被引用数 (Scopus)

    抄録

    A COMPLETE HARDWARE IMPLEMENTATION OF AN EXPERIMENTAL TWO-WIRE DIGITAL SUBSCRIBER LOOP TRANSMISSION SYSTEM USING BALANCED PAIRS OF WIRES IS DESCRIBED. IT IS BASED ON THE TIME DIVISION BURST MODE TRANSMISSION SCHEME (PING-PONG), AND PROVIDES TWO INFORMATION CHANNELS, 64 KBITS/S AND 8 KBITS/S, AND A SIGNALING CHANNEL BOTH WAYS. THE BURST CYCLE IS 2 MS AND LINE TRANSMISSION RATE IS 192 KBITS/S. THE SALIENT FEATURE OF THE SYSTEM IS THAT IT IS EQUIPPED WITH A POWERFUL BRIDGED TAPEQUALIZER WHICH HAS THE CAPABILITY TO COMPENSATE A LARGE FRACTION OF EXISTING TWO-WIRE SUBSCRIBER LOOPS IN JAPAN. IT ISREALIZED BY A FIFTH-ORDER RECURSIVE FILTER USING ANALOG TAPPED DELAY LINES, AND A MODIFIED ZERO FORCING ALGORITHM IS ADOPTED FOR THE ADAPTATION OF THE TAP COEFFICIENTS. THE EXPERIMENTAL RESULTS SHOWED THAT THE COMBINATION OF THE ″ROOT″ F AGC AND THE BRIDGED TAP EQUALIZER ENABLES THE DIGITAL TRANSMISSION UP TO 4 KM ON THE 0. 4 MM ″PHI″ SUBSCRIBER LINE WITH THREE BRIDGED TAPS EACH OF 400 M LENGTH.

    本文言語English
    ページ(範囲)2066-2073
    ページ数8
    ジャーナルIEEE TRANS COMMUN
    V COM-30
    N 9
    出版ステータスPublished - 1982 9

    ASJC Scopus subject areas

    • Engineering(all)

    フィンガープリント 「EXPERIMENTAL BIDIRECTIONAL SUBSCRIBER LOOP TRANSMISSION SYSTEM.」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル