Experimental measurements of an expansion deflection nozzle in open wake mode

N. V. Taylor, Tetsuya Sato

研究成果: Article

7 引用 (Scopus)

抜粋

Expansion Deflection nozzles present an attractive proposition as a replacement for conventional nozzles on launch vehicles, due to their reduced length, and altitude compensating capability. However, it has long been speculated that they suffer in the latter regard due to aspiration of the low speed flow region inside the nozzle by the supersonic jet surrounding it. This effect is investigated in this paper by direct experimental measurement of base pressures, and found to have little effect on the base pressure of the nozzle within the range of operating conditions investigated. Wall pressures were also used to calculate the efficiency of the altitude compensation within the nozzle, which was found to be between 87 and 100% for the three operating pressure ratios examined. This represents a significant improvement over conventional nozzle performance, and further conformation that wake pressures are indeed close to ambient.

元の言語English
ページ(範囲)377-386
ページ数10
ジャーナルJBIS - Journal of the British Interplanetary Society
60
発行部数10
出版物ステータスPublished - 2007 10 1

ASJC Scopus subject areas

  • Aerospace Engineering
  • Space and Planetary Science

フィンガープリント Experimental measurements of an expansion deflection nozzle in open wake mode' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用