Fabrication and mechanical properties of C/C-HfC-SiC composites

Yuki Yano, Kazuya Wada, Takuya Aoki, Toshio Ogasawara, Shinjiro Umezu

研究成果: Conference contribution

2 被引用数 (Scopus)

抄録

Many researchers study on reusable spacecraft/hypersonic aircraft for purpose of new aerospace transportation system. These transport aircraft flies at a speed of more than Mach 5. So researchers are considering the use of scramjet engine. Because this engine uses air as an oxidant and liquid hydrogen as a fuel, the combustion gas temperature is more than 2500°C. So the combustor is required lightweight material and super-heat-resistant material. SiC-based ceramics is used as heat-resistant material in the aerospace field. This material maintain the mechanical properties at high temperatures and has a high oxidation resistance. However, heat resistance temperature of this material is about 1600°C. Therefore, SiC-based ceramics can not be used in an environment of scramjet engine combustor. There are measures with a metal structure that is forcibly cooled by the refrigerant of fuel. Because this structure is very heavy and a complex system, it is difficult to a apply. This study uses the hafnium-based super heat-resistant ceramics that is having a melting point more than 2000°C. Purpose is to develop a new technique for forming the ceramics mainly composed from Hafnium Carbide by melt impregnation to inside C/C composite. Hafnium carbide is very high melting point (3950°C) and has oxidation resistance. In addition, material that has been created evaluate by the tissue changes due to cross-sectional observation and the strength test by three-point bending.

本文言語English
ホスト出版物のタイトルPrecision Engineering and Nanotechnology V
出版社Trans Tech Publications Ltd
ページ657-661
ページ数5
ISBN(印刷版)9783038352112
DOI
出版ステータスPublished - 2015
外部発表はい
イベント5th International Conference on Asian Society for Precision Engineering and Nanotechnology, ASPEN 2013 - Taipei, Taiwan, Province of China
継続期間: 2013 11月 122013 11月 15

出版物シリーズ

名前Key Engineering Materials
625
ISSN(印刷版)1013-9826
ISSN(電子版)1662-9795

Conference

Conference5th International Conference on Asian Society for Precision Engineering and Nanotechnology, ASPEN 2013
国/地域Taiwan, Province of China
CityTaipei
Period13/11/1213/11/15

ASJC Scopus subject areas

  • 材料科学(全般)
  • 材料力学
  • 機械工学

フィンガープリント

「Fabrication and mechanical properties of C/C-HfC-SiC composites」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル