Fabrication and performance evaluation of microfluidic organic light emitting diode

Takashi Kasahara, Shigeyuki Matsunami, Tomohiko Edura, Juro Oshima, Chihaya Adachi, Shuichi Shoji, Jun Mizuno

研究成果: Article

40 引用 (Scopus)

抜粋

In this study, we fabricated a microfluidic organic light emitting diode (OLED) and evaluated its performance. The microchip consisted of a 3 x 3 matrix array of OLED pixels in SU-8 microchannels sandwiched by indium tin oxide (ITO) anode and cathode pairs. Liquid organic semiconductors introduced into the microchannels were employed as the light emitters. Electroluminescence was successfully observed at the emitting area of the microchannels. A current density of 0.298 mA/cm2 was measured at 70 V. In our prototype microfluidic OLED, the patterning of the liquid emitters was confirmed in the microchannels on a single chip. This result shows that the proposed structure can be applicable for liquid-based display.

元の言語English
ページ(範囲)219-223
ページ数5
ジャーナルSensors and Actuators, A: Physical
195
DOI
出版物ステータスPublished - 2013 6 1

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Instrumentation
  • Condensed Matter Physics
  • Surfaces, Coatings and Films
  • Metals and Alloys
  • Electrical and Electronic Engineering

フィンガープリント Fabrication and performance evaluation of microfluidic organic light emitting diode' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用