Fabrication of living cell structure utilizing electrostatic inkjet phenomena

Shinjiro Umezu, T. Kitajima, H. Murase, H. Ohmori, KatahiraK., Y. Ito

研究成果: Conference contribution

3 引用 (Scopus)

抄録

We fabricated living cell lines, cell wall and cell cylinder utilizing electrostatic inkjet phenomena. The inkjet phenomena have two merits, higher resolution than commercial printer and ability to eject highly viscous liquid. These merits were preferable to print liquid with cells precisely and to eject liquid with scaffolds that were relatively high viscosity. In spite that high voltage was applied in case of the electrostatic inkjet phenomena, cells were living because current did not flow through cells but around cells.

元の言語English
ホスト出版物のタイトルProceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)
ページ419-422
ページ数4
DOI
出版物ステータスPublished - 2009
外部発表Yes
イベント22nd IEEE International Conference on Micro Electro Mechanical Systems, MEMS 2009 - Sorrento, Italy
継続期間: 2009 1 252009 1 29

Other

Other22nd IEEE International Conference on Micro Electro Mechanical Systems, MEMS 2009
Italy
Sorrento
期間09/1/2509/1/29

Fingerprint

Electrostatics
Cells
electrostatics
Fabrication
fabrication
Liquids
cells
Scaffolds
liquids
Viscosity
printers
cultured cells
Electric potential
high voltages
viscosity
high resolution

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Mechanical Engineering
  • Condensed Matter Physics
  • Electronic, Optical and Magnetic Materials

これを引用

Umezu, S., Kitajima, T., Murase, H., Ohmori, H., KatahiraK., & Ito, Y. (2009). Fabrication of living cell structure utilizing electrostatic inkjet phenomena. : Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS) (pp. 419-422). [4805408] https://doi.org/10.1109/MEMSYS.2009.4805408

Fabrication of living cell structure utilizing electrostatic inkjet phenomena. / Umezu, Shinjiro; Kitajima, T.; Murase, H.; Ohmori, H.; KatahiraK.; Ito, Y.

Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS). 2009. p. 419-422 4805408.

研究成果: Conference contribution

Umezu, S, Kitajima, T, Murase, H, Ohmori, H, KatahiraK. & Ito, Y 2009, Fabrication of living cell structure utilizing electrostatic inkjet phenomena. : Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)., 4805408, pp. 419-422, 22nd IEEE International Conference on Micro Electro Mechanical Systems, MEMS 2009, Sorrento, Italy, 09/1/25. https://doi.org/10.1109/MEMSYS.2009.4805408
Umezu S, Kitajima T, Murase H, Ohmori H, KatahiraK., Ito Y. Fabrication of living cell structure utilizing electrostatic inkjet phenomena. : Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS). 2009. p. 419-422. 4805408 https://doi.org/10.1109/MEMSYS.2009.4805408
Umezu, Shinjiro ; Kitajima, T. ; Murase, H. ; Ohmori, H. ; KatahiraK. ; Ito, Y. / Fabrication of living cell structure utilizing electrostatic inkjet phenomena. Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS). 2009. pp. 419-422
@inproceedings{993f7b3f550a43f18281ef715bb94e48,
title = "Fabrication of living cell structure utilizing electrostatic inkjet phenomena",
abstract = "We fabricated living cell lines, cell wall and cell cylinder utilizing electrostatic inkjet phenomena. The inkjet phenomena have two merits, higher resolution than commercial printer and ability to eject highly viscous liquid. These merits were preferable to print liquid with cells precisely and to eject liquid with scaffolds that were relatively high viscosity. In spite that high voltage was applied in case of the electrostatic inkjet phenomena, cells were living because current did not flow through cells but around cells.",
author = "Shinjiro Umezu and T. Kitajima and H. Murase and H. Ohmori and KatahiraK. and Y. Ito",
year = "2009",
doi = "10.1109/MEMSYS.2009.4805408",
language = "English",
pages = "419--422",
booktitle = "Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)",

}

TY - GEN

T1 - Fabrication of living cell structure utilizing electrostatic inkjet phenomena

AU - Umezu, Shinjiro

AU - Kitajima, T.

AU - Murase, H.

AU - Ohmori, H.

AU - KatahiraK.,

AU - Ito, Y.

PY - 2009

Y1 - 2009

N2 - We fabricated living cell lines, cell wall and cell cylinder utilizing electrostatic inkjet phenomena. The inkjet phenomena have two merits, higher resolution than commercial printer and ability to eject highly viscous liquid. These merits were preferable to print liquid with cells precisely and to eject liquid with scaffolds that were relatively high viscosity. In spite that high voltage was applied in case of the electrostatic inkjet phenomena, cells were living because current did not flow through cells but around cells.

AB - We fabricated living cell lines, cell wall and cell cylinder utilizing electrostatic inkjet phenomena. The inkjet phenomena have two merits, higher resolution than commercial printer and ability to eject highly viscous liquid. These merits were preferable to print liquid with cells precisely and to eject liquid with scaffolds that were relatively high viscosity. In spite that high voltage was applied in case of the electrostatic inkjet phenomena, cells were living because current did not flow through cells but around cells.

UR - http://www.scopus.com/inward/record.url?scp=65949104842&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=65949104842&partnerID=8YFLogxK

U2 - 10.1109/MEMSYS.2009.4805408

DO - 10.1109/MEMSYS.2009.4805408

M3 - Conference contribution

AN - SCOPUS:65949104842

SP - 419

EP - 422

BT - Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)

ER -