Fabrication of porous silicon-based all-solid state multicolor EL device with hole injecting film formed by electropolymerization

Tetsuya Osaka, Kako Ogasawara, Takehumi Okumura, Shinichi Komaba

研究成果: Article

4 引用 (Scopus)

抜粋

By using electropolymerized poly(N-vinylcarbazole) (PVCz) as a hole injecting film on porous n-silicon (PS), an all-solid state multicolor EL device on the basis of PS was able to be fabricated. The electroluminescence (EL) from the PVCz/PS device under forward bias was enhanced as compared with the device without PVCz film. An EL peak-shift of this device was observed with an increase in applied forward bias.

元の言語English
ページ(範囲)653-654
ページ数2
ジャーナルChemistry Letters
発行部数8
DOI
出版物ステータスPublished - 1996 1 1

ASJC Scopus subject areas

  • Chemistry(all)

フィンガープリント Fabrication of porous silicon-based all-solid state multicolor EL device with hole injecting film formed by electropolymerization' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用