FINITE ELEMENT ANALYSIS OF STRESSES FOR ORTHOTROPIC WOODS.

Gengo Matsui*, Akira Nishitani

*この研究の対応する著者

研究成果: Article査読

抄録

The diameter of a bolt-hole is usually made 1 mm bigger than that of a bolt itself. Hence an external force is mainly transmitted to the region in which the compressive normal stresses occur. By pouring some epoxy into a bolt joint, the bolt is expected to be free of excess play such that external forces can be transmitted through the whole region of wood. Actually that has been recognized by experiments. Elastic analysis satisfactorily explains how a concentrated force is transmitted into an orthotropic wood plate with epoxy-glued bolt joint. But it does not cover those cases in which the distances between free ends and bolts are not quite long. This paper discusses the finite element analyses of stresses for orthotropic woods with the epoxy-glued bolt joints.

本文言語English
ページ(範囲)32-39
ページ数8
ジャーナルWaseda Daigaku Rikogaku Kenkyusho Hokoku/Bulletin of Science and Engineering Research Laboratory,
118
出版ステータスPublished - 1987 12 1

ASJC Scopus subject areas

  • 工学(全般)

フィンガープリント

「FINITE ELEMENT ANALYSIS OF STRESSES FOR ORTHOTROPIC WOODS.」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル