Footstep Planning for Slippery and Slanted Terrain Using Human-Inspired Models

Martim Brandão, Kenji Hashimoto, José Santos-Victor, Atsuo Takanishi

研究成果: Article査読

27 被引用数 (Scopus)

抄録

Energy efficiency and robustness of locomotion to different terrain conditions are important problems for humanoid robots deployed in the real world. In this paper, we propose a footstep-planning algorithm for humanoids that is applicable to flat, slanted, and slippery terrain, which uses simple principles and representations gathered from human gait literature. The planner optimizes a center-of-mass (COM) mechanical work model subject to motion feasibility and ground friction constraints using a hybrid A∗ search and optimization approach. Footstep placements and orientations are discrete states searched with an A∗ algorithm, while other relevant parameters are computed through continuous optimization on state transitions. These parameters are also inspired by human gait literature and include footstep timing (double-support and swing time) and parameterized COM motion using knee flexion angle keypoints. The planner relies on work, the required coefficient of friction (RCOF), and feasibility models that we estimate in a physics simulation. We show through simulation experiments that the proposed planner leads to both low electrical energy consumption and human-like motion on a variety of scenarios. Using the planner, the robot automatically opts between avoiding or (slowly) traversing slippery patches depending on their size and friction, and it chooses energy-optimal stairs and climbing angles in slopes. The obtained motion is also consistent with observations found in human gait literature, such as human-like changes in RCOF, step length and double-support time on slippery terrain, and human-like curved walking on steep slopes. Finally, we compare COM work minimization with other choices of the objective function.

本文言語English
論文番号7511785
ページ(範囲)868-879
ページ数12
ジャーナルIEEE Transactions on Robotics
32
4
DOI
出版ステータスPublished - 2016 8

ASJC Scopus subject areas

  • 制御およびシステム工学
  • コンピュータ サイエンスの応用
  • 電子工学および電気工学

フィンガープリント

「Footstep Planning for Slippery and Slanted Terrain Using Human-Inspired Models」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル