Fundamental investigation of mixing properties evaluation for Intensive mixer using DEM simulation

Natsuki Kawabe, Yuki Tsunazawa, Chiharu Tokoro

    研究成果: Conference contribution

    抄録

    Mixing is an important process in various powder handling and operations. Objective of this study was DEM (discrete element method) simulation to grasp mixing properties, especially for mixing rate and final mixing degree, in intensive mixer which is drum typed stirring mill with eccentric agitator and baffle plate. To validate the simulation results, mixing experiments using hematite particles were also conducted. Both in simulation and experiment, various sample size was adopted for mixing evaluation because mixing degree depends on sample size. As a result in experiment, mixing rate and final mixing degree became lower and higher respectively as larger sample size was adopted. Similar trend was achieved in simulation. Furthermore, effect of agitator rotation speed, particle size and mill angle for mixing properties was investigated in DEM simulation. Simulation results suggested that mixing was achieved by early rapid convective mixing, followed by slow diffusive mixing. High rotation speed of agitator made early convective mixing more rapidly whereas it made following diffusive mixing more slowly. When the particle size became larger, convective mixing became dominant. Simulation results also demonstrated that 30° of machine angle brought most rapid mixing rate and total mixing rate became higher in binary components system.

    元の言語English
    ホスト出版物のタイトルEARTH 2015 - Proceedings of the 13th International Symposium on East Asian Resources Recycling Technology
    出版者International Symposium on East Asian Resources Recycling Technology
    ページ827-836
    ページ数10
    出版物ステータスPublished - 2015
    イベント13th International Symposium on East Asian Resources Recycling Technology, EARTH 2015 - Pattaya, Thailand
    継続期間: 2015 11 12015 11 4

    Other

    Other13th International Symposium on East Asian Resources Recycling Technology, EARTH 2015
    Thailand
    Pattaya
    期間15/11/115/11/4

    Fingerprint

    discrete element method
    simulation
    evaluation
    mill
    particle size
    experiment

    ASJC Scopus subject areas

    • Environmental Science(all)

    これを引用

    Kawabe, N., Tsunazawa, Y., & Tokoro, C. (2015). Fundamental investigation of mixing properties evaluation for Intensive mixer using DEM simulation. : EARTH 2015 - Proceedings of the 13th International Symposium on East Asian Resources Recycling Technology (pp. 827-836). International Symposium on East Asian Resources Recycling Technology.

    Fundamental investigation of mixing properties evaluation for Intensive mixer using DEM simulation. / Kawabe, Natsuki; Tsunazawa, Yuki; Tokoro, Chiharu.

    EARTH 2015 - Proceedings of the 13th International Symposium on East Asian Resources Recycling Technology. International Symposium on East Asian Resources Recycling Technology, 2015. p. 827-836.

    研究成果: Conference contribution

    Kawabe, N, Tsunazawa, Y & Tokoro, C 2015, Fundamental investigation of mixing properties evaluation for Intensive mixer using DEM simulation. : EARTH 2015 - Proceedings of the 13th International Symposium on East Asian Resources Recycling Technology. International Symposium on East Asian Resources Recycling Technology, pp. 827-836, 13th International Symposium on East Asian Resources Recycling Technology, EARTH 2015, Pattaya, Thailand, 15/11/1.
    Kawabe N, Tsunazawa Y, Tokoro C. Fundamental investigation of mixing properties evaluation for Intensive mixer using DEM simulation. : EARTH 2015 - Proceedings of the 13th International Symposium on East Asian Resources Recycling Technology. International Symposium on East Asian Resources Recycling Technology. 2015. p. 827-836
    Kawabe, Natsuki ; Tsunazawa, Yuki ; Tokoro, Chiharu. / Fundamental investigation of mixing properties evaluation for Intensive mixer using DEM simulation. EARTH 2015 - Proceedings of the 13th International Symposium on East Asian Resources Recycling Technology. International Symposium on East Asian Resources Recycling Technology, 2015. pp. 827-836
    @inproceedings{2d910f1e78d74465b1a722084b0f350d,
    title = "Fundamental investigation of mixing properties evaluation for Intensive mixer using DEM simulation",
    abstract = "Mixing is an important process in various powder handling and operations. Objective of this study was DEM (discrete element method) simulation to grasp mixing properties, especially for mixing rate and final mixing degree, in intensive mixer which is drum typed stirring mill with eccentric agitator and baffle plate. To validate the simulation results, mixing experiments using hematite particles were also conducted. Both in simulation and experiment, various sample size was adopted for mixing evaluation because mixing degree depends on sample size. As a result in experiment, mixing rate and final mixing degree became lower and higher respectively as larger sample size was adopted. Similar trend was achieved in simulation. Furthermore, effect of agitator rotation speed, particle size and mill angle for mixing properties was investigated in DEM simulation. Simulation results suggested that mixing was achieved by early rapid convective mixing, followed by slow diffusive mixing. High rotation speed of agitator made early convective mixing more rapidly whereas it made following diffusive mixing more slowly. When the particle size became larger, convective mixing became dominant. Simulation results also demonstrated that 30° of machine angle brought most rapid mixing rate and total mixing rate became higher in binary components system.",
    keywords = "DEM, Mixing ratio, Powder mixing",
    author = "Natsuki Kawabe and Yuki Tsunazawa and Chiharu Tokoro",
    year = "2015",
    language = "English",
    pages = "827--836",
    booktitle = "EARTH 2015 - Proceedings of the 13th International Symposium on East Asian Resources Recycling Technology",
    publisher = "International Symposium on East Asian Resources Recycling Technology",

    }

    TY - GEN

    T1 - Fundamental investigation of mixing properties evaluation for Intensive mixer using DEM simulation

    AU - Kawabe, Natsuki

    AU - Tsunazawa, Yuki

    AU - Tokoro, Chiharu

    PY - 2015

    Y1 - 2015

    N2 - Mixing is an important process in various powder handling and operations. Objective of this study was DEM (discrete element method) simulation to grasp mixing properties, especially for mixing rate and final mixing degree, in intensive mixer which is drum typed stirring mill with eccentric agitator and baffle plate. To validate the simulation results, mixing experiments using hematite particles were also conducted. Both in simulation and experiment, various sample size was adopted for mixing evaluation because mixing degree depends on sample size. As a result in experiment, mixing rate and final mixing degree became lower and higher respectively as larger sample size was adopted. Similar trend was achieved in simulation. Furthermore, effect of agitator rotation speed, particle size and mill angle for mixing properties was investigated in DEM simulation. Simulation results suggested that mixing was achieved by early rapid convective mixing, followed by slow diffusive mixing. High rotation speed of agitator made early convective mixing more rapidly whereas it made following diffusive mixing more slowly. When the particle size became larger, convective mixing became dominant. Simulation results also demonstrated that 30° of machine angle brought most rapid mixing rate and total mixing rate became higher in binary components system.

    AB - Mixing is an important process in various powder handling and operations. Objective of this study was DEM (discrete element method) simulation to grasp mixing properties, especially for mixing rate and final mixing degree, in intensive mixer which is drum typed stirring mill with eccentric agitator and baffle plate. To validate the simulation results, mixing experiments using hematite particles were also conducted. Both in simulation and experiment, various sample size was adopted for mixing evaluation because mixing degree depends on sample size. As a result in experiment, mixing rate and final mixing degree became lower and higher respectively as larger sample size was adopted. Similar trend was achieved in simulation. Furthermore, effect of agitator rotation speed, particle size and mill angle for mixing properties was investigated in DEM simulation. Simulation results suggested that mixing was achieved by early rapid convective mixing, followed by slow diffusive mixing. High rotation speed of agitator made early convective mixing more rapidly whereas it made following diffusive mixing more slowly. When the particle size became larger, convective mixing became dominant. Simulation results also demonstrated that 30° of machine angle brought most rapid mixing rate and total mixing rate became higher in binary components system.

    KW - DEM

    KW - Mixing ratio

    KW - Powder mixing

    UR - http://www.scopus.com/inward/record.url?scp=85017237736&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=85017237736&partnerID=8YFLogxK

    M3 - Conference contribution

    AN - SCOPUS:85017237736

    SP - 827

    EP - 836

    BT - EARTH 2015 - Proceedings of the 13th International Symposium on East Asian Resources Recycling Technology

    PB - International Symposium on East Asian Resources Recycling Technology

    ER -