TY - GEN
T1 - HAMR emulation on carbon overcoat and lubricant for near field transducer and magnetic media using surface-enhanced Raman sensors
AU - Yanagisawa, M.
AU - Kunimoto, M.
AU - Homma, T.
N1 - Funding Information:
This research was partially supported by "Nanotechnology Network Project", "Development of Systems and Technology for Advanced Measurement and Analysis", and "Grant-in-Aid for Scientific Research, 23656470 and 25630041” of the Ministry of Education, Culture, Sports, Science and Technology (MEXT), Japan, and Advanced Storage Research Consortium. We also thank CANON ANELVA CORPORATION for the deposition of ta-C film.
Publisher Copyright:
Copyright © 2017 ASME.
PY - 2017
Y1 - 2017
N2 - A plasmonic sensor is used for emulation of near field transducer (NFT). Some overcoat films (thickness of 1nm) were coated on Au nanoparticles (NPs) on a convex quartz glass substrate (plasmonic sensor). Heating behavior of the films was examined by laser heating using novel Raman spectroscopic tools, i.e. surface-enhanced Raman scattering (SERS) with the plasmonic sensor, a continuous laser heating tool, in-situ observation of spectra and temperature with a high speed time-resolved measurement. The heating temperature of tetrahedral carbon (ta-C) film in He gas is lower than that in air. This is because the thermal conductivity of He is larger than air. Few spectral change of ta-C film (thickness of 1nm) on Au NP’s is observed except initial change in around 100 s at the temperature around 500?, which corresponds to the temperature of the carbon overcoat (COC) for the media temperature of 327? (600K, Currie temperature for CoPt alloy). Some carbide films, i.e. SiC, TiC, and WC, showed high heat resistance, that is, few spectral change was observed. It is found that lubricant is evaporated from the COC on magnetic media and transferred to the plasmonic sensor.
AB - A plasmonic sensor is used for emulation of near field transducer (NFT). Some overcoat films (thickness of 1nm) were coated on Au nanoparticles (NPs) on a convex quartz glass substrate (plasmonic sensor). Heating behavior of the films was examined by laser heating using novel Raman spectroscopic tools, i.e. surface-enhanced Raman scattering (SERS) with the plasmonic sensor, a continuous laser heating tool, in-situ observation of spectra and temperature with a high speed time-resolved measurement. The heating temperature of tetrahedral carbon (ta-C) film in He gas is lower than that in air. This is because the thermal conductivity of He is larger than air. Few spectral change of ta-C film (thickness of 1nm) on Au NP’s is observed except initial change in around 100 s at the temperature around 500?, which corresponds to the temperature of the carbon overcoat (COC) for the media temperature of 327? (600K, Currie temperature for CoPt alloy). Some carbide films, i.e. SiC, TiC, and WC, showed high heat resistance, that is, few spectral change was observed. It is found that lubricant is evaporated from the COC on magnetic media and transferred to the plasmonic sensor.
UR - http://www.scopus.com/inward/record.url?scp=85034815276&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85034815276&partnerID=8YFLogxK
U2 - 10.1115/ISPS2017-5431
DO - 10.1115/ISPS2017-5431
M3 - Conference contribution
AN - SCOPUS:85034815276
T3 - ASME 2017 Conference on Information Storage and Processing Systems, ISPS 2017
BT - ASME 2017 Conference on Information Storage and Processing Systems, ISPS 2017
PB - American Society of Mechanical Engineers
T2 - ASME 2017 Conference on Information Storage and Processing Systems, ISPS 2017
Y2 - 29 August 2017 through 30 August 2017
ER -