Heat transfer enhancement in pool boiling of liquid nitrogen using a low thermal conductive layer with openings

Katsuyoshi Fukiba*, Hiroki Adachi, Tetsuya Sato

*この研究の対応する著者

研究成果: Article査読

抄録

A method of enhancing the heat transfer of a metal surface in pool boiling of liquid nitrogen by attaching a low thermal conductive layer with openings was proposed and evaluated. This method was proposed to improve a previously investigated method that used a layer without openings and had a low heat flux in a smaller degree of superheat range. Five surfaces of a copper plate, 6 mm in thickness and 50 mm in width and depth, were covered with polystyrene foam. The copper plate was soaked in liquid nitrogen, and its temperature variation was observed. The results indicate that the temperature of the plate with a layer having openings decreased three times faster than that of the plate without a layer. Furthermore, the temperature of the plate with a layer having openings decreased faster than that of the plate with a layer not having any openings. The heat flux of the plate with a layer having openings increased in both low and high degree of superheat ranges.

本文言語English
論文番号105545
ジャーナルInternational Communications in Heat and Mass Transfer
127
DOI
出版ステータスPublished - 2021 10

ASJC Scopus subject areas

  • 原子分子物理学および光学
  • 化学工学(全般)
  • 凝縮系物理学

フィンガープリント

「Heat transfer enhancement in pool boiling of liquid nitrogen using a low thermal conductive layer with openings」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル