High sensitive tilt sensor for quartz micromachining

Fusao Kohsaka, Jinxing Liang, Takahiro Matsuo, Toshitsugu Ueda

    研究成果: Article査読

    9 被引用数 (Scopus)

    抄録

    Many kinds of tilt sensors have been developed and applied to the field of tilt angle measurement. However, the improvement of a"Size", "Cost","Operability" and other"Performances" is expected. On the other hand, the high performance acceleration sensors were developed by MEMS technology, but there is almost no high sensitive MEMS sensor that detects a minute gravity change. We examined the possibility of development of tilt sensor fabricated by quartz crystal anisotropic-etching technology which is suitable for mass production. The developed tilt sensor is constructed of"Beam spring","Moving element" and"Capacitive detector of comb electrode". The feature of this sensor is that sensor chip is placed horizontally, and this arrangement enables fabrication of"Two axes sensor" on one wafer chip. We developed quartz tilt sensor using our laboratory fabrication process. Size of sensor chip is 5×5×0.1 mm3, and the evaluation result showed the highest level performance of 0.0001 degree resolution.

    本文言語English
    ジャーナルIEEJ Transactions on Sensors and Micromachines
    127
    10
    DOI
    出版ステータスPublished - 2007

    ASJC Scopus subject areas

    • 電子工学および電気工学
    • 機械工学

    フィンガープリント

    「High sensitive tilt sensor for quartz micromachining」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル