High-speed modulation of lateral p-i-n diode structure electro-absorption modulator integrated with DFB laser

Koichi Hasebe, Tomonari Sato, Koji Takeda, Takuro Fujii, Takaaki Kakitsuka, Shinji Matsuo

研究成果: Article

5 引用 (Scopus)

抄録

Large-scale photonic integrated circuits (PICs) are essential for reducing the cost and power consumption of optical networks. Selective doping by means of thermal diffusion and ion implantation is suitable for fabricating PICs because it enables doping into desired regions without crystal growth. In this paper, we report the fabrication of a lateral-p-i-n-diode-structure electro-absorption modulator (EAM) integrated with a DFB (EADFB) laser. Owing to the lateral p-i-n structure, we are able to use the broadening of the exciton absorption peak that occurs when the electric field is applied parallel to the quantum well. By comparing the calculated absorption spectrum change for parallel and vertical electric fields, we found that it occurs with a low electrical field, although the amount of absorption coefficient change is small for the parallel one. Thus, in our design, we make the EAM length larger than that of the conventional vertical electric field EAM. However, because of the low parasitic capacitance of the lateral EAM, we can expect to achieve high-speed operation. With a fabricated device with a 200-μm-long EAM, we have achieved 50-Gb/s operation with clear eye opening. We have also achieved a side-mode suppression ratio of more than 50 dB by using a surface grating. These results indicate that our lateral EADFB laser is very promising as an integrated light source for large-scale PICs and that our fabrication process based on selective doping is suitable for them.

元の言語English
記事番号6995975
ページ(範囲)1235-1240
ページ数6
ジャーナルJournal of Lightwave Technology
33
発行部数6
DOI
出版物ステータスPublished - 2015 3 15
外部発表Yes

Fingerprint

p-i-n diodes
modulators
high speed
modulation
lasers
integrated circuits
photonics
electric fields
fabrication
embedded atom method
thermal diffusion
ion implantation
crystal growth
implantation
absorptivity
light sources
capacitance
excitons
retarding
quantum wells

ASJC Scopus subject areas

  • Atomic and Molecular Physics, and Optics

これを引用

High-speed modulation of lateral p-i-n diode structure electro-absorption modulator integrated with DFB laser. / Hasebe, Koichi; Sato, Tomonari; Takeda, Koji; Fujii, Takuro; Kakitsuka, Takaaki; Matsuo, Shinji.

:: Journal of Lightwave Technology, 巻 33, 番号 6, 6995975, 15.03.2015, p. 1235-1240.

研究成果: Article

Hasebe, K, Sato, T, Takeda, K, Fujii, T, Kakitsuka, T & Matsuo, S 2015, 'High-speed modulation of lateral p-i-n diode structure electro-absorption modulator integrated with DFB laser', Journal of Lightwave Technology, 巻. 33, 番号 6, 6995975, pp. 1235-1240. https://doi.org/10.1109/JLT.2014.2383385
Hasebe, Koichi ; Sato, Tomonari ; Takeda, Koji ; Fujii, Takuro ; Kakitsuka, Takaaki ; Matsuo, Shinji. / High-speed modulation of lateral p-i-n diode structure electro-absorption modulator integrated with DFB laser. :: Journal of Lightwave Technology. 2015 ; 巻 33, 番号 6. pp. 1235-1240.
@article{f702dd342478402b8caa3be427768f5c,
title = "High-speed modulation of lateral p-i-n diode structure electro-absorption modulator integrated with DFB laser",
abstract = "Large-scale photonic integrated circuits (PICs) are essential for reducing the cost and power consumption of optical networks. Selective doping by means of thermal diffusion and ion implantation is suitable for fabricating PICs because it enables doping into desired regions without crystal growth. In this paper, we report the fabrication of a lateral-p-i-n-diode-structure electro-absorption modulator (EAM) integrated with a DFB (EADFB) laser. Owing to the lateral p-i-n structure, we are able to use the broadening of the exciton absorption peak that occurs when the electric field is applied parallel to the quantum well. By comparing the calculated absorption spectrum change for parallel and vertical electric fields, we found that it occurs with a low electrical field, although the amount of absorption coefficient change is small for the parallel one. Thus, in our design, we make the EAM length larger than that of the conventional vertical electric field EAM. However, because of the low parasitic capacitance of the lateral EAM, we can expect to achieve high-speed operation. With a fabricated device with a 200-μm-long EAM, we have achieved 50-Gb/s operation with clear eye opening. We have also achieved a side-mode suppression ratio of more than 50 dB by using a surface grating. These results indicate that our lateral EADFB laser is very promising as an integrated light source for large-scale PICs and that our fabrication process based on selective doping is suitable for them.",
keywords = "DFB laser, electro absorption modulator, lateral current injection, photonic integrated circuits",
author = "Koichi Hasebe and Tomonari Sato and Koji Takeda and Takuro Fujii and Takaaki Kakitsuka and Shinji Matsuo",
year = "2015",
month = "3",
day = "15",
doi = "10.1109/JLT.2014.2383385",
language = "English",
volume = "33",
pages = "1235--1240",
journal = "Journal of Lightwave Technology",
issn = "0733-8724",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "6",

}

TY - JOUR

T1 - High-speed modulation of lateral p-i-n diode structure electro-absorption modulator integrated with DFB laser

AU - Hasebe, Koichi

AU - Sato, Tomonari

AU - Takeda, Koji

AU - Fujii, Takuro

AU - Kakitsuka, Takaaki

AU - Matsuo, Shinji

PY - 2015/3/15

Y1 - 2015/3/15

N2 - Large-scale photonic integrated circuits (PICs) are essential for reducing the cost and power consumption of optical networks. Selective doping by means of thermal diffusion and ion implantation is suitable for fabricating PICs because it enables doping into desired regions without crystal growth. In this paper, we report the fabrication of a lateral-p-i-n-diode-structure electro-absorption modulator (EAM) integrated with a DFB (EADFB) laser. Owing to the lateral p-i-n structure, we are able to use the broadening of the exciton absorption peak that occurs when the electric field is applied parallel to the quantum well. By comparing the calculated absorption spectrum change for parallel and vertical electric fields, we found that it occurs with a low electrical field, although the amount of absorption coefficient change is small for the parallel one. Thus, in our design, we make the EAM length larger than that of the conventional vertical electric field EAM. However, because of the low parasitic capacitance of the lateral EAM, we can expect to achieve high-speed operation. With a fabricated device with a 200-μm-long EAM, we have achieved 50-Gb/s operation with clear eye opening. We have also achieved a side-mode suppression ratio of more than 50 dB by using a surface grating. These results indicate that our lateral EADFB laser is very promising as an integrated light source for large-scale PICs and that our fabrication process based on selective doping is suitable for them.

AB - Large-scale photonic integrated circuits (PICs) are essential for reducing the cost and power consumption of optical networks. Selective doping by means of thermal diffusion and ion implantation is suitable for fabricating PICs because it enables doping into desired regions without crystal growth. In this paper, we report the fabrication of a lateral-p-i-n-diode-structure electro-absorption modulator (EAM) integrated with a DFB (EADFB) laser. Owing to the lateral p-i-n structure, we are able to use the broadening of the exciton absorption peak that occurs when the electric field is applied parallel to the quantum well. By comparing the calculated absorption spectrum change for parallel and vertical electric fields, we found that it occurs with a low electrical field, although the amount of absorption coefficient change is small for the parallel one. Thus, in our design, we make the EAM length larger than that of the conventional vertical electric field EAM. However, because of the low parasitic capacitance of the lateral EAM, we can expect to achieve high-speed operation. With a fabricated device with a 200-μm-long EAM, we have achieved 50-Gb/s operation with clear eye opening. We have also achieved a side-mode suppression ratio of more than 50 dB by using a surface grating. These results indicate that our lateral EADFB laser is very promising as an integrated light source for large-scale PICs and that our fabrication process based on selective doping is suitable for them.

KW - DFB laser

KW - electro absorption modulator

KW - lateral current injection

KW - photonic integrated circuits

UR - http://www.scopus.com/inward/record.url?scp=84925044230&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84925044230&partnerID=8YFLogxK

U2 - 10.1109/JLT.2014.2383385

DO - 10.1109/JLT.2014.2383385

M3 - Article

AN - SCOPUS:84925044230

VL - 33

SP - 1235

EP - 1240

JO - Journal of Lightwave Technology

JF - Journal of Lightwave Technology

SN - 0733-8724

IS - 6

M1 - 6995975

ER -