How to apply approved leed simulation for sustainable buildings in Japan

Jin Ho Yang*, Hyun Tae Kim, Shin Ichi Tanabe

*この研究の対応する著者

研究成果: Paper査読

抄録

Many energy analysis programs have been developed to calculate the heating and cooling loads of buildings. To more accurately predict energy consumption through the use of energy simulation programs, the selected weather data is very important. Energy simulation programs developed by foreign countries use particular weather data formats. In order to use Japanese weather data in foreign energy simulation programs, conversion of weather data is required. Therefore, in this study, we compared the energy simulation program used in Japan to those used abroad and examined the integrity of the converted weather data. In this study, we obtained almost identical results from the energy simulation program of Japan and the LEED approved simulation program. However, we need to consider the correction value with the appropriate coverage since there were differences in the heating and cooling loads by region. Further, the difference in heating and cooling peak loads in the energy simulation program causes a significant impact on the selection of equipment. Therefore, we think that more quantitatively calculated data is required in order to apply foreign energy simulation programs to Japan.

本文言語English
ページ282-288
ページ数7
出版ステータスPublished - 2014 1月 1
イベント13th International Conference on Indoor Air Quality and Climate, Indoor Air 2014 - Hong Kong, Hong Kong
継続期間: 2014 7月 72014 7月 12

Conference

Conference13th International Conference on Indoor Air Quality and Climate, Indoor Air 2014
国/地域Hong Kong
CityHong Kong
Period14/7/714/7/12

ASJC Scopus subject areas

  • 汚染
  • 建築および建設
  • 健康、毒物学および変異誘発
  • コンピュータ サイエンスの応用

フィンガープリント

「How to apply approved leed simulation for sustainable buildings in Japan」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル