Hydrogen-carbon bond on the nanostructured graphite for hydrogen sensor

Yinghe Zhang, David Booka

    研究成果: Article査読


    There is a need to understand the hydrogen sorption mechanism(s). In this work, hydrogenated graphite samples were characterized by TGA-Mass Spectrometry, Raman spectroscopy and high resolution TEM. It was found that graphite milled for various times (0-40 h) had different d-spacings and CHx (x≤3) ratios. Graphite milled up to 10 h that was subsequently heated (under argon to 990 °C) desorbed only hydrogen, while above 10 h the amount of desorbed hydrogen decreased and an increasing amount of methane was also evolved. The 10 h sample had no measurable sp3 bonding, and desorbed 5.5 wt% hydrogen when heated. While the 40 h sample had a d-spacing of 0.48 nm, both sp2 and sp 3 bonding, and desorbed 5.1 wt% pure hydrogen. The mechanism of graphite hydrogenation is discussed in terms of hydrogen atoms being predominately trapped at the graphite edges, rather than between graphene layers.

    ジャーナルUnknown Journal
    出版ステータスPublished - 2013

    ASJC Scopus subject areas

    • 工学(全般)


    「Hydrogen-carbon bond on the nanostructured graphite for hydrogen sensor」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。