Hydrothermal synthesis of magadiite and kenyaite

Katsunori Kosuge, Atsushi Yamazaki, Atsumu Tsunashima, Ryohei Otsuka

研究成果: Article

49 引用 (Scopus)

抜粋

In order to synthesize well-crystallized magadiite and kenyaite as a single phase in a short reaction time, amorphous silica was hydrothermally reacted with alkaline solutions in the temperature range from 150°C to 200°C. From a suspension containing SiO2 and NaOH with molar ratios of H2O/SiO2 = 18.5 and NaOH/SiO2 = 0.23, magadiite was formed after a reaction time of 48 h at 150°C or after 18 h at 170°C. The formation of Na-kenyaite, however, required 6 h at 200°C. Then, KOH and K2CO2 were used to lower the formation temperature of kenyaite. K-kenyaite was synthesized after 16 h at 185°C from a suspension with molar ratios of H2 O/SiO2 = 18.5 and KOH/SiO2 = 0.23. Furthermore, (Na, K)-kenyaite was formed after 48 h at 150°C or after 24 h at 170°C from suspensions with molar ratios of H2O/ SiO2 = 18.5, NaOH/SiO2 = 0.23 and NaOH/K2CO2 = 0.95-23. Magadiite and kenyaite were formed through a difinite induction period after dissolution of amorphous silica.

元の言語English
ページ(範囲)326-331
ページ数6
ジャーナルNippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan
100
発行部数1159
DOI
出版物ステータスPublished - 1992 1 1
外部発表Yes

ASJC Scopus subject areas

  • Ceramics and Composites
  • Chemistry(all)
  • Condensed Matter Physics
  • Materials Chemistry

フィンガープリント Hydrothermal synthesis of magadiite and kenyaite' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用