Impact factors of aluminum alloy expansion joints for bridges

T. Yoda

    研究成果: Conference contribution

    抜粋

    The expansion joints are expected to have movement capacity, bearing capacity for static and dynamic loading, water-tightness, low noise emission and traffic safety. In particular, the failure due to impact loading is the main cause for the observed damages. The problem of dynamic behavior of the expansion joints is so complex that the impact factor for vehicle load that is governed by traffic impact plays a key role. In order to overcome this difficulty, the cantilever-toothed aluminum joint (finger joint) is considered to be one of the promising joints under impact loading. In this study, from the viewpoint of design methodology, numerical studies for impact behavior were conducted for aluminum alloy expansion joints with perforated dowels. The design impact factor for the expansion joints with the perforated dowels against traffic impact loading was examined by using numerical simulations.

    元の言語English
    ホスト出版物のタイトルProceedings of the 8th International Conference on Shock and Impact Loads on Structures
    ページ755-760
    ページ数6
    出版物ステータスPublished - 2009
    イベント8th International Conference on Shock and Impact Loads on Structures - Adelaide, SA
    継続期間: 2009 12 22009 12 4

    Other

    Other8th International Conference on Shock and Impact Loads on Structures
    Adelaide, SA
    期間09/12/209/12/4

    ASJC Scopus subject areas

    • Civil and Structural Engineering

    フィンガープリント Impact factors of aluminum alloy expansion joints for bridges' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用

    Yoda, T. (2009). Impact factors of aluminum alloy expansion joints for bridges. : Proceedings of the 8th International Conference on Shock and Impact Loads on Structures (pp. 755-760)