In-situ measurement of the optical constant of ultrathin films using optical fiber sensor

Naganori Takezawa, Isamu Kato

研究成果: Article

抜粋

We use an optical fiber sensor whose part of clad is removed for the optical constants of ultra thin film measurement. The sensitivity of the sensor is increased by decreasing the diameter of the optical fiber and/or increasing the length of the film deposited part. The result of the in situ measurement method of change of amorphous hydrogenated silicon (a-Si:H) ultra thin films by oxidation with passage of time by leaking from vacuum to atmospheric air is shown. We use an optical fiber sensor whose length of the film deposited part is 100 mm, diameter of the core is 110 μm and the core material is silica. a-Si:H film with approximately 10 nm in thickness is deposited on the core of the optical fiber sensor. The oxidation saturates in approximately 600 s. The larger attenuation of transmitted light at the long wavelengths from 685 to 800 nm is observed. This phenomenon is maybe due to the change of defects by relaxation.

元の言語English
ページ(範囲)355-361
ページ数7
ジャーナルUnknown Journal
2997
DOI
出版物ステータスPublished - 1997

ASJC Scopus subject areas

  • Applied Mathematics
  • Computer Science Applications
  • Electrical and Electronic Engineering
  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics

フィンガープリント In-situ measurement of the optical constant of ultrathin films using optical fiber sensor' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用