In-vitro Evaluation Method to Measure the Radial Force of Various Stents

Y. Okamoto, T. Tanaka, H. Kobashi, K. Iwasaki, M. Umezu

研究成果: Conference contribution

2 被引用数 (Scopus)

抄録

Endovascular treatments of stenosis in carotid artery often utilize a self-expanding stent. There are a variety of stents commercially available. The radial force of a stent is a key parameter to characterize its mechanical property, but there is no reliable evaluation to standardize the force measurement. In measuring the radial force accurately, the stent deformation has to be uniform for the whole structure so as to ensure the force balance. Here we aim to develop such a measuring system of stent radial force, and compare the results with those obtained by conventional techniques. A developed device consisted of a tubular stent holder and a load measuring system. The Precise, Protege and Easy Wall stents with a diameter (D) of 10 mm were placed by a delivery system. Radial forces were measured with D = 8, 6, 5, and 4 mm at a temperature of 37 degrees. Maintaining the circular shape of stents was found to influence substantially the magnitude of radial force. The value increased about 80 % at maximum for those measured by conventional techniques. These data show that the radial force has to be uniformly applied in a circumferential direction. Also, the Easy Wall stent showed a distinct tendency in contrast to the Precise and Protege stent. The Easy Wall stent was found to be placed with eliminating the axial variation of mesh geometries. These results indicate that the radial force measurements of stents have to ensure the uniform mesh geometry in both the axial and circumferential direction. It was concluded that our device can ensure the reliable measurement of stent radial forces.

本文言語English
ホスト出版物のタイトル13th International Conference on Biomedical Engineering - ICBME 2008
ページ1053-1056
ページ数4
DOI
出版ステータスPublished - 2009 12 1
イベント13th International Conference on Biomedical Engineering, ICBME 2008 - , Singapore
継続期間: 2008 12 32008 12 6

出版物シリーズ

名前IFMBE Proceedings
23
ISSN(印刷版)1680-0737

Conference

Conference13th International Conference on Biomedical Engineering, ICBME 2008
CountrySingapore
Period08/12/308/12/6

ASJC Scopus subject areas

  • Bioengineering
  • Biomedical Engineering

フィンガープリント 「In-vitro Evaluation Method to Measure the Radial Force of Various Stents」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル