Influence of traction oil on power loss of cylindrical gears

Kunihiko Morikawa, Mikio Nagahara, Ryuta Nishihara, Susumu Matsumoto

    研究成果: Article査読


    Most transmissions that use a traction drive mechanism also have a gear train to transmit power to the outside. In these transmissions, traction oil is used both as the working fluid and gear lubricant. Since precedence is given to the performance of traction oil as a working fluid, its performance as a lubricant is generally inferior. The traction coefficient of traction oil is higher than that of automatic transmission fluids (ATFs), so it is thought that the power loss of meshing gears under traction oil will be larger than that under ATF. In this paper, we experimentally compare the power loss of meshing gears between use with traction oil and with ATF and show that the power loss with the former increases by approximately 0.5% compared with that found for ATF. And also, it is shown that the magnitude of the power loss depends on the gear dimensions and operating conditions. The one of authors proposed the new estimation formula of friction coefficient and confirmed the usefulness of this formula under ATFs. In this paper, the usefulness of proposed estimation formula is also confirmed under traction oil.

    ジャーナルNihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C
    出版ステータスPublished - 2013

    ASJC Scopus subject areas

    • Mechanical Engineering
    • Mechanics of Materials
    • Industrial and Manufacturing Engineering

    フィンガープリント 「Influence of traction oil on power loss of cylindrical gears」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。