Interfacial reaction and its effect on strength of Al18B4O33/Al composites

J. Pan*, G. Sasaki, L. J. Yao, M. Yoshida, H. Fukunaga

*この研究の対応する著者

研究成果査読

34 被引用数 (Scopus)

抄録

Aluminium alloy 6061, AC8A, Al-1Mg, Al-9Cu and pure aluminium composites reinforced with aluminium borate whiskers were fabricated by a squeeze casting process. The interfacial reaction in the composites and its effect on the bending strength are discussed, together with the results from SEM, TEM, and X-ray diffraction. A slight interfacial reaction is favourable for composite strength as it has the effect of anchoring the whiskers. A T6 treatment can enhance the strength of an Al-9Cu matrix composite, but is not efficient for magnesium containing 6061 and AC8A matrix composites. Furthermore, if heated at temperatures higher than 793 K for a long time, the composite strength drops rapidly owing to whisker damage and shortening during the interfacial reaction. It is suggested that the interface in an Al18B4O33/Al alloy composite is stable below 623 K which is the temperature requirement for automobile engine components.

本文言語English
ページ(範囲)1044-1048
ページ数5
ジャーナルMaterials Science and Technology
15
9
DOI
出版ステータスPublished - 1999 9
外部発表はい

ASJC Scopus subject areas

  • 材料科学(全般)
  • 凝縮系物理学
  • 材料力学
  • 機械工学

フィンガープリント

「Interfacial reaction and its effect on strength of Al<sub>18</sub>B<sub>4</sub>O<sub>33</sub>/Al composites」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル