Investigating the accuracy of 3D models created using SfM

Kosei Ishida*

*この研究の対応する著者

研究成果査読

3 被引用数 (Scopus)

抄録

Technological innovations in photogrammetry have progressed over time, and civil engineers in Japan have employed this technology for earthworks. Photogrammetry has also been introduced to building construction work, and in particular, it is used in the surveying of buildings and the production of architectural drawings in repair work. With this motivation, the authors evaluate the accuracy of Three-dimensional (3D) model extraction using structure from motion (SfM) photogrammetry. In particular, the authors evaluate the accuracy of the height measurements (Z axis). The authors survey the accuracy of a 3D model using a cube with a side length of 5 cm. Our surveying procedure consists of the following four steps: 1. Place the cube on a turntable, rotate the turntable in 5° increment, and capture 72 photographs. 2. Select 12 photographs considering six control points. Edit the control points given their 3D positions in each of the 12 photographs. 3. Extract the 3D model using SfM software. 4. Import the 3D model and measure the height of the cube at 121 points. In this paper, we discuss the differences in the measurement accuracy resulting from the differences in the camera position.

本文言語English
ページ834-839
ページ数6
DOI
出版ステータスPublished - 2017
外部発表はい
イベント34th International Symposium on Automation and Robotics in Construction, ISARC 2017 - Taipei, Taiwan, Province of China
継続期間: 2017 6 282017 7 1

Other

Other34th International Symposium on Automation and Robotics in Construction, ISARC 2017
国/地域Taiwan, Province of China
CityTaipei
Period17/6/2817/7/1

ASJC Scopus subject areas

  • 建築および建設
  • コンピュータ ビジョンおよびパターン認識
  • 人工知能

フィンガープリント

「Investigating the accuracy of 3D models created using SfM」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル