Investigation of the dominating mechanism of fatigue life for various alloys with CSSC on R = O and -1

Ayumi Komori, Eriko Watanabe, Momoko Toda, Rumi Kitazawa, Makoto Yoshida, Susumu Horibe

研究成果: Article査読

抄録

Most studies on CSSC (cyclic stress-strain curve) have been conducted in the condition of the stress ratio R= -1. There are few reports on the effect of mean stress on CSSC. In this study, the stress-controlled fatigue tests under A=0 and -1 were performed on JIS S25C (AISI 1020), IF steel, A2024-T6, A6061-T6 and Ti-6A1-4V alloys. CSSCs of R=0 and -1 were compared. Creep strain (ratcheting strain) was also measured to investigate dominating mechanism of fatigue life of these alloys. It was found that the effect of mean stress on CSSC was different with each alloy. The dominating mechanism of JIS S25C and IF steel was creep strain. However, the dominating mechanism of A2024-T6 and A6061-T6 was plastic strain amplitude. The dominating mechanism of Ti-6A1-4V alloy was both creep strain and plastic strain amplitude. Thus, fatigue life reduction caused by mean stress in Ti-6A1-4V alloy was remarkably occurred than the other alloys. [doi:10.2320/jinstmet.J2013010].

本文言語English
ページ(範囲)295-299
ページ数5
ジャーナルNippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals
77
8
DOI
出版ステータスPublished - 2013 8

ASJC Scopus subject areas

  • 凝縮系物理学
  • 材料力学
  • 金属および合金
  • 材料化学

フィンガープリント

「Investigation of the dominating mechanism of fatigue life for various alloys with CSSC on R = O and -1」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル