In a conventional field oriented control of induction motor the rotor flux is assumed to be constant so that the torque is controlled by controlling the q-axis current only. In field-weakening region the rotor flux is decreased to achieve a very high rotor speed, as a consequence the available torque is reduced. In the other hand, to produce a maximum torque the rotor flux should be generated as much as possible. In this paper, a novel, simple field-weakening strategy, which provides a maximum torque capability for a sinusoidal PWM VSI-fed induction motor drive, is presented. The purpose of proposed strategy is to add the absolute q-axis current to d-axis current reference so that proper flux and torque for any given torque-producing current reference are produced automatically. The maximum torque when it is required can be obtained over the entire field-weakening region without using machine parameters or special control strategy. A saturated sinusoidal PWM is used which limits the amplitude of the inverter voltage references. As an advantage, the effective output voltage as seen by the motor is boosted. Simulation and experiment results verify the performance of the proposed method.
|出版ステータス||Published - 2001 12月 1|
|イベント||27th Annual Conference of the IEEE Industrial Electronics Society IECON'2001 - Denver, CO, United States|
継続期間: 2001 11月 29 → 2001 12月 2
|Conference||27th Annual Conference of the IEEE Industrial Electronics Society IECON'2001|
|Period||01/11/29 → 01/12/2|
ASJC Scopus subject areas