Knock prediction using multi-dimensional modeling on gasoline engines

Kenjiro Nakama, Eiji Murase, Jin Kusaka, Yasuhiro Daisho

研究成果: Article

4 引用 (Scopus)

抜粋

A multi-dimensional model for the simulation of flow and combustion in an engine was extended to knock calculation. A flamelet model proposed by Tahry and based on the probability of finding the flame was implemented for accurate prediction of flame propagation in a homogeneous-charge turbulent pre-mixed combustion. A Shell model proposed by Halstead, modified to satisfy the principle of mass conservation, was used for knock calculation and combined with the flamelet model to estimate the knock onset location. Flame propagation was visualized in an optical access engine, while knock detection was visualized in an actual engine. The results confirmed that the calculations predicted flame propagation well. Simulation of the knock onset location was also shown to be possible.

元の言語English
ページ(範囲)277-284
ページ数8
ジャーナルReview of Automotive Engineering
26
発行部数3
出版物ステータスPublished - 2005 7 1

ASJC Scopus subject areas

  • Automotive Engineering

フィンガープリント Knock prediction using multi-dimensional modeling on gasoline engines' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用