La2Ni0.5Li0.5O4 modified single polycrystalline particles of NMC622 for improved capacity retention in high-voltage lithium-ion batteries

Chinnasamy Sengottaiyan, Kei Kubota, Shinichi Kumakura, Yang TaeHyeon, Tomooki Hosaka, Shinichi Komaba*

*この研究の対応する著者

研究成果: Article査読

抄録

Ni-rich lithium nickel manganese cobalt oxides have been extensively studied as high capacity and low cost positive electrode materials for lithium-ion batteries. In order to improve their electrochemical properties, especially cycle capability, we develop a surface modification on single polycrystalline particles of LiNi0.6Mn0.2Co0.2O2 (NMC622) powder with a lanthanum-based oxide. A wet-chemical process and following heat-treatment at 750 °C produce K2NiF4-type La2Ni0.5Li0.5O4 nanoparticles on the surface of NMC622 particles. The La2Ni0.5Li0.5O4-modification improves capacity retention of NMC622 during long-term charge-discharge cycling in the wide voltage range of 3.0–4.5 V at room temperature. The capacity retention at the 150th cycle is about 86% (from 182 to 157 mAh g-1) which is higher than 78% (from 176 to 135 mAh g-1) obtained for the unmodified NMC622 electrode. Further improvements by the La2Ni0.5Li0.5O4 modification are confirmed in the capacity retention cycled at 60 °C and in the discharging rate capability. The La2Ni0.5Li0.5O4-modification is highly effective on the single polycrystalline particles of Ni-rich NMC for long cycle-life and high-rate lithium-ion batteries.

本文言語English
論文番号A5
ジャーナルJournal of the Electrochemical Society
168
11
DOI
出版ステータスPublished - 2021 11月
外部発表はい

ASJC Scopus subject areas

  • 電子材料、光学材料、および磁性材料
  • 再生可能エネルギー、持続可能性、環境
  • 表面、皮膜および薄膜
  • 電気化学
  • 材料化学

フィンガープリント

「La2Ni0.5Li0.5O4 modified single polycrystalline particles of NMC622 for improved capacity retention in high-voltage lithium-ion batteries」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル