Low-drive-voltage Ti: LiNbO3 Mach-Zehnder modulator using a coupled line

T. Namiki*, N. Mekada, H. Hamano, T. Yamane, M. Seino, Hirochika Nakajima

*この研究の対応する著者

研究成果: Conference contribution

3 被引用数 (Scopus)

抄録

A modulator that uses a coupled line as a traveling-wave electrode to reduce the drive voltage is discussed. For modulation, complementary signals with equal amplitude and 180° out of phase are applied to the coupled line. The modulator was fabricated on a z-cut LiNbO3 wafer for use at 1.55 μm. Wavegiudes were formed by diffusing 90-nm-thick, 7-μm-wide Ti stripes for 8 h 1050°C in wet O2. The 500-nm-thick SiO2 buffer layer was formed by electron-beam evaporation. The coupled line used plated gold electrodes 9 μm wide, 5 μm thick, and 20 mm long. The two lines were 12 μm apart. The drive voltage is 27 V at 100 Hz. The insertion loss of the microwave energy increases slowly as the frequency rises. It is -3 dB at 2.5 GHz and -6 dB at 10 GHz. The 3-dB bandwidth of the modulation response exceeds 5 GHz. The bandwidth is limited by the loss of microwave energy and velocity mismatch. It can be expanded by optimizing the coupled linear structure and using a thicker buffer layer and electrodes. This modulator shows promise for use in broadband and low-drive-voltage modulation.

本文言語English
ホスト出版物のタイトルTechnical Digest Series
Place of PublicationWashington, DC, United States
出版社Publ by Optical Soc of America
ページ34
ページ数1
ISBN(印刷版)1557521123
出版ステータスPublished - 1990
外部発表はい
イベント1990 Optical Fiber Communications Conference - OFC'90 - San Francisco, CA, USA
継続期間: 1990 1月 221990 1月 26

Other

Other1990 Optical Fiber Communications Conference - OFC'90
CitySan Francisco, CA, USA
Period90/1/2290/1/26

ASJC Scopus subject areas

  • 工学(全般)

フィンガープリント

「Low-drive-voltage Ti: LiNbO3 Mach-Zehnder modulator using a coupled line」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル