Managing preventive maintenance on a disassembly line using multi-kanban mechanism

K. Nakashima, S. M. Gupta

研究成果: Conference contribution

抄録

Your This paper investigates the effect on the performance of two production control mechanisms, viz. push and pull, on a disassembly line where interruptions are caused by preventive maintenance. In the push system, blocking and starvation are compensated by the large amount of inventories stored in the buffers. Thus, the system must disassemble components prior to the arrival of actual demand. Alternatively, the multi-kanban pull system offsets the blocking and starvation by manipulating the kanban routing. Hence, it directs kanban to the proper workstation based on system’s current status. Compared to the push system, the pull system tends to keep smaller amounts of inventories while attempting to service the actual demand. Through a case example, we present advantages and disadvantages of both systems.

本文言語English
ホスト出版物のタイトル24th International Conference on Production Research, ICPR 2017
編集者Marek Fertsch, Agnieszka Stachowiak, Beata Mrugalska, Joanna Oleskow-Szlapka, Lukasz Hadas, Piotr Cyplik, Paulina Golinska-Dawson
出版社DEStech Publications
ページ496-502
ページ数7
ISBN(電子版)9781605955070
出版ステータスPublished - 2017
外部発表はい
イベント24th International Conference on Production Research, ICPR 2017 - Poznan, Poland
継続期間: 2017 7 302017 8 3

出版物シリーズ

名前24th International Conference on Production Research, ICPR 2017

Conference

Conference24th International Conference on Production Research, ICPR 2017
国/地域Poland
CityPoznan
Period17/7/3017/8/3

ASJC Scopus subject areas

  • コンピュータ サイエンスの応用
  • 産業および生産工学
  • 制御およびシステム工学

フィンガープリント

「Managing preventive maintenance on a disassembly line using multi-kanban mechanism」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル