Measurements of effective fracture toughness values for hydraulic fracture: Dependence on pressure and fluid rheology

Jon Holder, Nobuo Morita, A. J. Kenrick, Sitharam Thallak, K. E. Gray

    研究成果: Conference contribution

    7 引用 (Scopus)

    抄録

    Results from a series of laboratory hydrofracture tests, in which different fracture fluids, fracture fluid injection rates, confining pressures, and test specimen mechanical and fluid transport properties were used, are presented and discussed. Fracture fluids included various simple linear viscous (Newtonian) fluids and different combinations of three types of commercial fracture fluids: linear gels, cross-linked gels, and combinations of gels with suspended solids. Systematic variations in the behavior of fracture initiation pressures, and fracture fluid pressures during stages of stable fracture propagation, are observed to depend on fluid flow resistance, leak-off rate, and fracture fluid rheology. Post-test inspections of hydrofracture surfaces indicate the presence of a dry zone near the fracture tip. The effective hydrofracture toughness parameters determined from the tests with fracture fluid gels are substantially higher than the normal Mode-I toughness values, determined for the same material. The behavior is interpreted to be the consequence of a build-up of solids at the fracture tip, from dehydration of fracture fluids containing gels and/or solids.

    元の言語English
    ホスト出版物のタイトルProduction Operations Symposium
    出版場所Richardson, TX, United States
    出版者Publ by Society of Petroleum Engineers (SPE)
    ページ761-770
    ページ数10
    出版物ステータスPublished - 1993
    イベントProceedings of the Production Operations Symposium - Oklahoma City, OK, USA
    継続期間: 1993 3 211993 3 23

    Other

    OtherProceedings of the Production Operations Symposium
    Oklahoma City, OK, USA
    期間93/3/2193/3/23

    Fingerprint

    Rheology
    Fracture toughness
    Hydraulics
    Fluids
    Gels
    Toughness
    Dehydration
    Transport properties
    Flow of fluids
    Crack propagation
    Inspection

    ASJC Scopus subject areas

    • Engineering(all)

    これを引用

    Holder, J., Morita, N., Kenrick, A. J., Thallak, S., & Gray, K. E. (1993). Measurements of effective fracture toughness values for hydraulic fracture: Dependence on pressure and fluid rheology. : Production Operations Symposium (pp. 761-770). Richardson, TX, United States: Publ by Society of Petroleum Engineers (SPE).

    Measurements of effective fracture toughness values for hydraulic fracture : Dependence on pressure and fluid rheology. / Holder, Jon; Morita, Nobuo; Kenrick, A. J.; Thallak, Sitharam; Gray, K. E.

    Production Operations Symposium. Richardson, TX, United States : Publ by Society of Petroleum Engineers (SPE), 1993. p. 761-770.

    研究成果: Conference contribution

    Holder, J, Morita, N, Kenrick, AJ, Thallak, S & Gray, KE 1993, Measurements of effective fracture toughness values for hydraulic fracture: Dependence on pressure and fluid rheology. : Production Operations Symposium. Publ by Society of Petroleum Engineers (SPE), Richardson, TX, United States, pp. 761-770, Proceedings of the Production Operations Symposium, Oklahoma City, OK, USA, 93/3/21.
    Holder J, Morita N, Kenrick AJ, Thallak S, Gray KE. Measurements of effective fracture toughness values for hydraulic fracture: Dependence on pressure and fluid rheology. : Production Operations Symposium. Richardson, TX, United States: Publ by Society of Petroleum Engineers (SPE). 1993. p. 761-770
    Holder, Jon ; Morita, Nobuo ; Kenrick, A. J. ; Thallak, Sitharam ; Gray, K. E. / Measurements of effective fracture toughness values for hydraulic fracture : Dependence on pressure and fluid rheology. Production Operations Symposium. Richardson, TX, United States : Publ by Society of Petroleum Engineers (SPE), 1993. pp. 761-770
    @inproceedings{f1d1e23bcf4744fa88767ec6fa7eec48,
    title = "Measurements of effective fracture toughness values for hydraulic fracture: Dependence on pressure and fluid rheology",
    abstract = "Results from a series of laboratory hydrofracture tests, in which different fracture fluids, fracture fluid injection rates, confining pressures, and test specimen mechanical and fluid transport properties were used, are presented and discussed. Fracture fluids included various simple linear viscous (Newtonian) fluids and different combinations of three types of commercial fracture fluids: linear gels, cross-linked gels, and combinations of gels with suspended solids. Systematic variations in the behavior of fracture initiation pressures, and fracture fluid pressures during stages of stable fracture propagation, are observed to depend on fluid flow resistance, leak-off rate, and fracture fluid rheology. Post-test inspections of hydrofracture surfaces indicate the presence of a dry zone near the fracture tip. The effective hydrofracture toughness parameters determined from the tests with fracture fluid gels are substantially higher than the normal Mode-I toughness values, determined for the same material. The behavior is interpreted to be the consequence of a build-up of solids at the fracture tip, from dehydration of fracture fluids containing gels and/or solids.",
    author = "Jon Holder and Nobuo Morita and Kenrick, {A. J.} and Sitharam Thallak and Gray, {K. E.}",
    year = "1993",
    language = "English",
    pages = "761--770",
    booktitle = "Production Operations Symposium",
    publisher = "Publ by Society of Petroleum Engineers (SPE)",

    }

    TY - GEN

    T1 - Measurements of effective fracture toughness values for hydraulic fracture

    T2 - Dependence on pressure and fluid rheology

    AU - Holder, Jon

    AU - Morita, Nobuo

    AU - Kenrick, A. J.

    AU - Thallak, Sitharam

    AU - Gray, K. E.

    PY - 1993

    Y1 - 1993

    N2 - Results from a series of laboratory hydrofracture tests, in which different fracture fluids, fracture fluid injection rates, confining pressures, and test specimen mechanical and fluid transport properties were used, are presented and discussed. Fracture fluids included various simple linear viscous (Newtonian) fluids and different combinations of three types of commercial fracture fluids: linear gels, cross-linked gels, and combinations of gels with suspended solids. Systematic variations in the behavior of fracture initiation pressures, and fracture fluid pressures during stages of stable fracture propagation, are observed to depend on fluid flow resistance, leak-off rate, and fracture fluid rheology. Post-test inspections of hydrofracture surfaces indicate the presence of a dry zone near the fracture tip. The effective hydrofracture toughness parameters determined from the tests with fracture fluid gels are substantially higher than the normal Mode-I toughness values, determined for the same material. The behavior is interpreted to be the consequence of a build-up of solids at the fracture tip, from dehydration of fracture fluids containing gels and/or solids.

    AB - Results from a series of laboratory hydrofracture tests, in which different fracture fluids, fracture fluid injection rates, confining pressures, and test specimen mechanical and fluid transport properties were used, are presented and discussed. Fracture fluids included various simple linear viscous (Newtonian) fluids and different combinations of three types of commercial fracture fluids: linear gels, cross-linked gels, and combinations of gels with suspended solids. Systematic variations in the behavior of fracture initiation pressures, and fracture fluid pressures during stages of stable fracture propagation, are observed to depend on fluid flow resistance, leak-off rate, and fracture fluid rheology. Post-test inspections of hydrofracture surfaces indicate the presence of a dry zone near the fracture tip. The effective hydrofracture toughness parameters determined from the tests with fracture fluid gels are substantially higher than the normal Mode-I toughness values, determined for the same material. The behavior is interpreted to be the consequence of a build-up of solids at the fracture tip, from dehydration of fracture fluids containing gels and/or solids.

    UR - http://www.scopus.com/inward/record.url?scp=0027186905&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=0027186905&partnerID=8YFLogxK

    M3 - Conference contribution

    AN - SCOPUS:0027186905

    SP - 761

    EP - 770

    BT - Production Operations Symposium

    PB - Publ by Society of Petroleum Engineers (SPE)

    CY - Richardson, TX, United States

    ER -