Mechanism Design of a Standing-up Assistance Chair based on Practical Human Motion

Shenghao Yin, Yun Ting Liao*, Eiichiro Tanaka

*この研究の対応する著者

研究成果: Chapter

抄録

A standing-up assistance chair without any electric actuator for the weak-muscle people, such as elderly people and patients, was developed in this research. The mechanism was designed based on the real human standing-up motion. To satisfy the motion, the design principles were considered, 1) the timing of opportunity of leaning forward motion (forward movement of shoulder) before lifting the hip joint is 40% of standing-up phase; 2) The trajectory of user’s hip joint is a straight line with angle of 45 [deg]; 3) the device supports the user until his/her knee joint angle achieve around 60 [deg]. The mechanism with eight linkages based on Hart’s exact straight-line mechanism was considered, which can realize the motion of the approximate straight line with an angle of 45 [deg]. Based on the real human motion and design principles, the proper link lengths of the device were simulated to observe the effect of hip joint angle and the trajectory of COG. We confirmed that during the phase of standing leaning forward and recovered motion can be assisted with an adequate method. By using our assistance chair, the torque on each joint can be decreased. For different sizes of users, we intend to build S, M, L types of the device. Based on the average human body data [3].

本文言語English
ホスト出版物のタイトルMechanisms and Machine Science
出版社Springer Netherlands
ページ1451-1460
ページ数10
DOI
出版ステータスPublished - 2019 1月 1

出版物シリーズ

名前Mechanisms and Machine Science
73
ISSN(印刷版)2211-0984
ISSN(電子版)2211-0992

ASJC Scopus subject areas

  • 材料力学
  • 機械工学

フィンガープリント

「Mechanism Design of a Standing-up Assistance Chair based on Practical Human Motion」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル