Micromachining of photonic bandgap fiber using focused ion beam milling technique

Xuefeng Li*, Jinxing Liang, Shuo Lin, Yupeng Zhang, Toshitsugu Ueda

*この研究の対応する著者

    研究成果: Article査読

    抄録

    In this paper, a micromachining technique was reported that processing of photonic bandgap fiber (PBGF) was using focused ion beam (FIB) milling. PBGFs can be filled with fluid, allowing light to interact with the fluid while it is guided. Therefore, PBGFs are now widely used in ever-widening areas of science and technology. PBGFs of a honeycomb-structure with a hollow-core surrounded by microstructured cladding, and the widths of the thin silica struts are typically 40 to 50 nm. The FIB milling technique was used for micromachining to improve the sensitivity of PBGF gas sensors in this study. And a measurement system based on the PBGF gas cell has also been developed and implemented. The absorption measurements of acetylene gas and methane gas have been investigated. The experimental results clearly indicated that the high sensitivity of gas detection due to the long interaction path length provided by PBGF.

    本文言語English
    ページ(範囲)230-234
    ページ数5
    ジャーナルAdvanced Science Letters
    12
    DOI
    出版ステータスPublished - 2012 6月

    ASJC Scopus subject areas

    • 教育
    • 健康(社会科学)
    • 数学 (全般)
    • エネルギー(全般)
    • コンピュータ サイエンス(全般)
    • 環境科学(全般)
    • 工学(全般)

    フィンガープリント

    「Micromachining of photonic bandgap fiber using focused ion beam milling technique」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル