Mixing characteristics of a submerged jet measured using an isokinetic sampling probe

K. Ito*, S. Kobayashi, M. Tokuda

*この研究の対応する著者

研究成果: Article査読

15 被引用数 (Scopus)

抄録

The flow properties and mixing characteristics of a submerged gas jet near the injection point were measured using an isokinetic sampling probe in a water model. The radial and axial profiles of gas velocity, water velocity, and void fraction were measured. Since the gas velocity was always larger than that of the water, the existence of a slip velocity between gas and water was confirmed. A one-dimensional mathematical model was developed using the dimensionless slip velocity as a parameter. The dimensionless slip velocity (S) was estimated to be 0.3 to 0.6 for the nitrogen-water system. The S of the He-water system was slightly larger than that of the nitrogen-water system. When the model was applied to calculate the gas fraction in the jet for the nitrogen-mercury system, S was estimated to be 0.95 to 0.97. A large slip velocity between gas and liquid is expected for gas-metal systems.

本文言語English
ページ(範囲)439-445
ページ数7
ジャーナルMetallurgical Transactions B
22
4
DOI
出版ステータスPublished - 1991 8 1

ASJC Scopus subject areas

  • 工学(全般)

フィンガープリント

「Mixing characteristics of a submerged jet measured using an isokinetic sampling probe」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル