Model-based cutting simulation system for prediction of cutting states

Shozo Takata*, Yoshiyuki Yamasaki

*この研究の対応する著者

研究成果: Article査読

6 被引用数 (Scopus)

抄録

This paper describes a cutting simulation system which has the function of physical simulations as well as geometrical simulations. In the geometrical simulation, changes in workpiece geometry in the course of cutting processes are evaluated based on a solid modeling system. In the physical simulation, physical parameters of cutting processes are evaluated based on physical models. Instantaneous cutting force can be estimated by composing cutting force vectors acting on infinitesimal parts of flutes. Cutting error is then estimated based on tool deflections induced by the cutting force. A system for simulating the cutting process using a square end mill cutter has been developed based on a geometric modeler with boundary representations. A number of cutting experiments were conducted for various tools and cutting conditions. The results of experiments proved the accuracy of estimations by the simulation system.

本文言語English
ページ(範囲)266-272
ページ数7
ジャーナルNippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C
61
581
出版ステータスPublished - 1995 1
外部発表はい

ASJC Scopus subject areas

  • 材料力学
  • 機械工学
  • 産業および生産工学

フィンガープリント

「Model-based cutting simulation system for prediction of cutting states」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル