Morphology and electrical conductivity of injection-molded polypropylene/carbon black composites with addition of high-density polyethylene

Hiroshi Yui, Guozhang Wu*, Hironari Sano, Masao Sumita, Kuniki Kino

*この研究の対応する著者

研究成果: Article査読

128 被引用数 (Scopus)

抄録

This work attempts to clarify the influence of carbon black (CB) addition on the microstructure of injection-molded high-density polyethylene (HDPE)/polypropylene (PP) blends and effect of shear-induced polymer deformation on the conductive network structure. We observed that HDPE molecules are strongly interacted with carbon surfaces and CB particles are selectively located in HDPE domains. Morphology of the injection-molded specimen consists of three parts, namely, CB-HDPE complex domain, free HDPE domain and PP domain. The volume and microstructure of the free HDPE domain are significantly influenced by HDPE and CB concentration, CB structure, and PP viscosity. We also confirmed that the CB particles are capable of self-assembly to form random conductive networks even under high shear rate within very short time. The morphological changes were finally correlated to the variation of electrical conductivity.

本文言語English
ページ(範囲)3599-3608
ページ数10
ジャーナルPolymer
47
10
DOI
出版ステータスPublished - 2006 5 3

ASJC Scopus subject areas

  • 有機化学
  • ポリマーおよびプラスチック
  • 材料化学

フィンガープリント

「Morphology and electrical conductivity of injection-molded polypropylene/carbon black composites with addition of high-density polyethylene」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル