Multi-color microfluidic electrochemiluminescence cells

Takashi Kasahara, Shigeyuki Matsunami, Tomohiko Edura, Ryoichi Ishimatsu, Juro Oshima, Miho Tsuwaki, Toshihiko Imato, Shuichi Shoji, Chihaya Adachi, Jun Mizuno*

*この研究の対応する著者

研究成果: Article査読

30 被引用数 (Scopus)

抄録

We demonstrated multi-color microfluidic electrochemiluminescence (ECL) cells. 5,6,11,12-Tetraphenylnaphthacene (rubrene), 9,10-diphenylanthracene (DPA), tetraphenyldibenzoperiflanthene (DBP)-doped rubrene, and 1,2,3,5-tetrakis(carbazol-9-yl)-4,6-dicyanobenzene (4CzIPN) dissolved in a mixed organic solvent of 1,2-dichlorobenzene and acetonitrile in the ratio of 2:1 (v/v) were used as yellow, blue, red, and green ECL solutions, respectively. Light emissions were confirmed using simple-structured ECL cells consisting of two indium tin oxide (ITO) coated glass substrates with an SU-8 spacer of thickness varying from 0.9 to 6 μm. The SU-8-based microfluidic ECL cells were fabricated using photolithography and heterogeneous bonding techniques through the use of epoxy- and amine-terminated self-assembled monolayers. The emitting layers were formed on-demand by injecting the chosen ECL solutions into the microchannels sandwiched between ITO anode and cathode pairs. Multi-color ECL was successfully obtained at the light-emitting pixels. The microfluidic ECL cells with DBP-doped rubrene solution showed a maximum luminance of 11.6 cd/m2 and the current efficiency of ca. 0.32 cd/A at 8 V. We expect that the proposed microfluidic device will be a highly promising technology for liquid-based light-emitting applications.

本文言語English
ページ(範囲)225-229
ページ数5
ジャーナルSensors and Actuators, A: Physical
214
DOI
出版ステータスPublished - 2014 8月 1

ASJC Scopus subject areas

  • 電子材料、光学材料、および磁性材料
  • 器械工学
  • 凝縮系物理学
  • 表面、皮膜および薄膜
  • 金属および合金
  • 電子工学および電気工学

フィンガープリント

「Multi-color microfluidic electrochemiluminescence cells」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル