Multiobjective geometry optimization of microchannel heat exchanger using real-coded genetic algorithm

John Carlo S. Garcia*, Hiroki Tanaka, Niccolo Giannetti, Yuichi Sei, Kiyoshi Saito, Mamoru Houfuku, Ryoichi Takafuji

*この研究の対応する著者

研究成果: Article査読

2 被引用数 (Scopus)

抄録

In this paper, a multiobjective optimization of the structure of a flat-tubed microchannel heat exchanger is performed to reduce its volume and fan power at a specified capacity. Design variables include tube height, tube width, tube length, fin height, and fin pitch. A weight-based, real-coded genetic algorithm is implemented to optimize the design variables within their specified range of dimensions. To further improve the numerical simulations of the microchannel heat exchanger performance, correlations for the air-side Nusselt number, friction factor, and fin efficiency are developed and validated. In the optimization, the Pareto optimal fronts are obtained by varying weights of the two conflicting objectives. A reference microchannel heat exchanger operating at different capacities is optimized. Results show that the volume and fan power of the reference microchannel heat exchanger can be reduced by up to 45% and 51% respectively, depending on the weighting factor selected. The optimization approach of this study provides the optimal solutions at the given domain of geometric parameter dimensions.

本文言語English
論文番号117821
ジャーナルApplied Thermal Engineering
202
DOI
出版ステータスPublished - 2022 2月 5

ASJC Scopus subject areas

  • エネルギー工学および電力技術
  • 産業および生産工学

フィンガープリント

「Multiobjective geometry optimization of microchannel heat exchanger using real-coded genetic algorithm」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル