New particles technology for oxide-superconductor using dry- and wet-type jet mill

Hirosi Kezuka, Isamu Kato, Tosiki Shirane, Masaaki Ikeda

    研究成果: Conference contribution

    抄録

    Superconducting YBCO particles with an average size of 1-2 μm were prepared by dry-type jet mill. It is found from the measurements of critical currents (Ic) that the superconducting transition temperature (Tc) at 91 - 92 K is obtained for the YBCO particles which have oriented and elongated grains align parallel to (003) (005) and (006) -plane. On the other hand, fine YBCO particles were prepared from high quality superconducting YBCO powders by wet - type jet mill in a high pressure flow of MEK (methyl-ethyl-ketone:CH3COCH2CH3) or toluene(C6H5CH3). As a result, the resulting particles are homogenius in MEK and fine YBCO particles show oriented and polycrystal structures with an average particle size of 164nm in diameter and with the lattice parameter of a=3.9A, b=3.5A in [001]-orientation from TEM (Transmission Electron Microscopy) - studies.

    本文言語English
    ホスト出版物のタイトルProceedings of the IEEE International Conference on Properties and Applications of Dielectric Materials
    Place of PublicationPiscataway, NJ, United States
    出版社IEEE
    ページ794-796
    ページ数3
    2
    出版ステータスPublished - 2000
    イベント6th Interantional Conference on Properties and Applications of Dielectric Materials - Xi'an, China
    継続期間: 2000 6 212000 6 26

    Other

    Other6th Interantional Conference on Properties and Applications of Dielectric Materials
    CityXi'an, China
    Period00/6/2100/6/26

    ASJC Scopus subject areas

    • Electrical and Electronic Engineering
    • Electronic, Optical and Magnetic Materials

    フィンガープリント 「New particles technology for oxide-superconductor using dry- and wet-type jet mill」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル