Ni thin films vacuum-evaporated on polyethylene naphthalate substrates with and without the application of magnetic field

Hideo Kaiju*, Akito Ono, Nobuyoshi Kawaguchi, Kenji Kondo, Akira Ishibashi, Jonghan Won, Akihiko Hirata, Manabu Ishimaru, Yoshihiko Hirotsu

*この研究の対応する著者

研究成果: Article査読

10 被引用数 (Scopus)

抄録

We study the structural properties of the surface roughness, the surface mound size and the interfacial structure in Ni thin films vacuum-deposited on polyethylene naphthalate (PEN) organic substrates with and without the application of magnetic field and discuss its feasibility of fabricating quantum cross (QC) devices. For Ni/PEN evaporated without the magnetic field, the surface roughness decreases from 1.3 nm to 0.69 nm and the surface mound size increases from 32 nm to 80 nm with the thickness increased to 41 nm. In contrast, for Ni/PEN evaporated in the magnetic field of 360 Oe, the surface roughness tends to slightly decrease from 1.3 nm to 1.1 nm and the surface mound size shows the almost constant value of 28-30 nm with the thickness increased to 35 nm. It can be also confirmed for each sample that there is no diffusion of Ni into the PEN layer, resulting in clear Ni/PEN interface and smooth Ni surface. Therefore, these experimental results indicate that Ni/PEN films can be expected as metal/insulator hybrid materials in QC devices, leading to novel high-density memory devices.

本文言語English
ページ(範囲)3706-3712
ページ数7
ジャーナルApplied Surface Science
255
6
DOI
出版ステータスPublished - 2009 1月 1
外部発表はい

ASJC Scopus subject areas

  • 化学 (全般)
  • 凝縮系物理学
  • 物理学および天文学(全般)
  • 表面および界面
  • 表面、皮膜および薄膜

フィンガープリント

「Ni thin films vacuum-evaporated on polyethylene naphthalate substrates with and without the application of magnetic field」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル