Nickel zinc ferrite thick film as substrate overlay for improved performance of microstrip patch antenna

I. H. Hasan, M. N. Hamidon, A. Ismail, I. Ismail, M. A.M. Kusaimi, S. Azhari, N. A.M. Azhari, R. Osman

研究成果: Conference article査読

4 被引用数 (Scopus)

抄録

In this paper, nickel zinc ferrite (NZF) nanopowder was mixed with organic vehicle which consists of linseed oil, m-xylene and α-terpineol. Then the mixture was sonicated for 1 hour at 40°C in order to obtain homogenous paste, followed by printing it onto FR4 substrate using the screen printing technique to form the NZF thick film layer before dried at 100°C and later fired at 200°C. A basic square shape patch antenna by using silver paste was printed onto the NZF thick film layer and was compared with another patch antenna which was been printed without the NZF layer. The results showed that the antenna with NZF thick film layer has return loss of -10.97dB, resonant frequency 6.42GHz, bandwidth 3.9 and Q factor of 1.646, which is better compared to the antenna without the layer by 32.81%, 3.22%, 86.60% and 44.69% respectively.

本文言語English
論文番号012004
ジャーナルIOP Conference Series: Materials Science and Engineering
380
1
DOI
出版ステータスPublished - 2018 7月 11
外部発表はい
イベント2018 6th International Conference on Nanomaterials and Materials Engineering, ICNME 2018 - Langkawi, Malaysia
継続期間: 2018 3月 232018 3月 25

ASJC Scopus subject areas

  • 材料科学(全般)
  • 工学(全般)

フィンガープリント

「Nickel zinc ferrite thick film as substrate overlay for improved performance of microstrip patch antenna」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル