Nominal cooling capacity of radiant ceiling panels in hot and humid regions

Jun Shinoda, Jiannan Liu, Miki Iijima, Kazuki Furumoto, Riho Matsuzaki, Shinichi Tanabe, Hiroki Iwata

    研究成果: Conference contribution

    抄録

    Radiant cooling systems are commonly used in regions such as Europe, and many standards on their measurement and design have been developed. However, some standards do not apply to hot and humid regions such as Japan. The aim of this research is to investigate the effects of factors commonly found in such regions on the cooling capacity of radiant panels. Experiments were conducted in a test room made in accordance with the EN14240 Standard. Results showed that increase in air velocity increased both the cooling capacity and the downward heat flux. An increase in temperature within the ceiling chamber resulted in the decrease of the downward heat flux while the cooling capacity increased. It was concluded that proper control of the thermal environment within the ceiling chamber was vital when measuring the cooling capacity of radiant panels, and that the downward heat flux should be calculated when designing radiant systems.

    元の言語English
    ホスト出版物のタイトルHealthy Buildings Europe 2017
    出版者International Society of Indoor Air Quality and Climate
    ISBN(印刷物)9788379472604
    出版物ステータスPublished - 2017 1 1
    イベントHealthy Buildings Europe 2017, HB 2017 - Lublin, Poland
    継続期間: 2017 7 22017 7 5

    Other

    OtherHealthy Buildings Europe 2017, HB 2017
    Poland
    Lublin
    期間17/7/217/7/5

    Fingerprint

    Ceilings
    Cooling
    Heat flux
    Cooling systems
    Air
    Experiments
    Temperature

    ASJC Scopus subject areas

    • Civil and Structural Engineering

    これを引用

    Shinoda, J., Liu, J., Iijima, M., Furumoto, K., Matsuzaki, R., Tanabe, S., & Iwata, H. (2017). Nominal cooling capacity of radiant ceiling panels in hot and humid regions. : Healthy Buildings Europe 2017 International Society of Indoor Air Quality and Climate.

    Nominal cooling capacity of radiant ceiling panels in hot and humid regions. / Shinoda, Jun; Liu, Jiannan; Iijima, Miki; Furumoto, Kazuki; Matsuzaki, Riho; Tanabe, Shinichi; Iwata, Hiroki.

    Healthy Buildings Europe 2017. International Society of Indoor Air Quality and Climate, 2017.

    研究成果: Conference contribution

    Shinoda, J, Liu, J, Iijima, M, Furumoto, K, Matsuzaki, R, Tanabe, S & Iwata, H 2017, Nominal cooling capacity of radiant ceiling panels in hot and humid regions. : Healthy Buildings Europe 2017. International Society of Indoor Air Quality and Climate, Healthy Buildings Europe 2017, HB 2017, Lublin, Poland, 17/7/2.
    Shinoda J, Liu J, Iijima M, Furumoto K, Matsuzaki R, Tanabe S その他. Nominal cooling capacity of radiant ceiling panels in hot and humid regions. : Healthy Buildings Europe 2017. International Society of Indoor Air Quality and Climate. 2017
    Shinoda, Jun ; Liu, Jiannan ; Iijima, Miki ; Furumoto, Kazuki ; Matsuzaki, Riho ; Tanabe, Shinichi ; Iwata, Hiroki. / Nominal cooling capacity of radiant ceiling panels in hot and humid regions. Healthy Buildings Europe 2017. International Society of Indoor Air Quality and Climate, 2017.
    @inproceedings{2a7864c578594d5fb24cec71a841900a,
    title = "Nominal cooling capacity of radiant ceiling panels in hot and humid regions",
    abstract = "Radiant cooling systems are commonly used in regions such as Europe, and many standards on their measurement and design have been developed. However, some standards do not apply to hot and humid regions such as Japan. The aim of this research is to investigate the effects of factors commonly found in such regions on the cooling capacity of radiant panels. Experiments were conducted in a test room made in accordance with the EN14240 Standard. Results showed that increase in air velocity increased both the cooling capacity and the downward heat flux. An increase in temperature within the ceiling chamber resulted in the decrease of the downward heat flux while the cooling capacity increased. It was concluded that proper control of the thermal environment within the ceiling chamber was vital when measuring the cooling capacity of radiant panels, and that the downward heat flux should be calculated when designing radiant systems.",
    keywords = "Ceiling chamber temperature, Downward heat flux, Forced convection, Panel insulation",
    author = "Jun Shinoda and Jiannan Liu and Miki Iijima and Kazuki Furumoto and Riho Matsuzaki and Shinichi Tanabe and Hiroki Iwata",
    year = "2017",
    month = "1",
    day = "1",
    language = "English",
    isbn = "9788379472604",
    booktitle = "Healthy Buildings Europe 2017",
    publisher = "International Society of Indoor Air Quality and Climate",

    }

    TY - GEN

    T1 - Nominal cooling capacity of radiant ceiling panels in hot and humid regions

    AU - Shinoda, Jun

    AU - Liu, Jiannan

    AU - Iijima, Miki

    AU - Furumoto, Kazuki

    AU - Matsuzaki, Riho

    AU - Tanabe, Shinichi

    AU - Iwata, Hiroki

    PY - 2017/1/1

    Y1 - 2017/1/1

    N2 - Radiant cooling systems are commonly used in regions such as Europe, and many standards on their measurement and design have been developed. However, some standards do not apply to hot and humid regions such as Japan. The aim of this research is to investigate the effects of factors commonly found in such regions on the cooling capacity of radiant panels. Experiments were conducted in a test room made in accordance with the EN14240 Standard. Results showed that increase in air velocity increased both the cooling capacity and the downward heat flux. An increase in temperature within the ceiling chamber resulted in the decrease of the downward heat flux while the cooling capacity increased. It was concluded that proper control of the thermal environment within the ceiling chamber was vital when measuring the cooling capacity of radiant panels, and that the downward heat flux should be calculated when designing radiant systems.

    AB - Radiant cooling systems are commonly used in regions such as Europe, and many standards on their measurement and design have been developed. However, some standards do not apply to hot and humid regions such as Japan. The aim of this research is to investigate the effects of factors commonly found in such regions on the cooling capacity of radiant panels. Experiments were conducted in a test room made in accordance with the EN14240 Standard. Results showed that increase in air velocity increased both the cooling capacity and the downward heat flux. An increase in temperature within the ceiling chamber resulted in the decrease of the downward heat flux while the cooling capacity increased. It was concluded that proper control of the thermal environment within the ceiling chamber was vital when measuring the cooling capacity of radiant panels, and that the downward heat flux should be calculated when designing radiant systems.

    KW - Ceiling chamber temperature

    KW - Downward heat flux

    KW - Forced convection

    KW - Panel insulation

    UR - http://www.scopus.com/inward/record.url?scp=85053906933&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=85053906933&partnerID=8YFLogxK

    M3 - Conference contribution

    AN - SCOPUS:85053906933

    SN - 9788379472604

    BT - Healthy Buildings Europe 2017

    PB - International Society of Indoor Air Quality and Climate

    ER -