Nonlinear vibration induced by the water-film whirl and whip in a sliding bearing rotor system

Liming Zhai, Yongyao Luo, Zhengwei Wang, Seishiro Kitauchi, Kazuyoshi Miyagawa

    研究成果: Article

    4 引用 (Scopus)

    抄録

    Many industrial applications and experiments have shown that sliding bearings often experience fluid film whip due to nonlinear fluid film forces which can cause rotor-stator rub-impact failures. The oil-film whips have attracted many studies while the water-film whips in the water lubricated sliding bearing have been little researched with the mechanism still an open problem. The dynamic fluid film forces in a water sliding bearing are investigated numerically with rotational, whirling and squeezing motions of the journal using a nonlinear model to identify the relationships between the three motions. Rotor speed-up and slow-down experiments are then conducted with the rotor system supported by a water lubricated sliding bearing to induce the water-film whirl/whip and verify the relationship. The experimental results show that the vibrations of the journal alternated between increasing and decreasing rather than continuously increasing as the rotational speed increased to twice the first critical speed, which can be explained well by the nonlinear model. The radial growth rate of the whirl motion greatly affects the whirl frequency of the journal and is responsible for the frequency lock in the water-film whip. Further analysis shows that increasing the lubricating water flow rate changes the water-film whirl/whip characteristics, reduces the first critical speed, advances the time when significant water-film whirling motion occurs, and also increases the vibration amplitude at the bearing center which may lead to the rotor-stator rub-impact. The study gives the insight into the water-film whirl and whip in the water lubricated sliding bearing.

    元の言語English
    ページ(範囲)260-270
    ページ数11
    ジャーナルChinese Journal of Mechanical Engineering (English Edition)
    29
    発行部数2
    DOI
    出版物ステータスPublished - 2016 3 1

    Fingerprint

    Bearings (structural)
    Rotors
    Water
    Stators
    Fluids
    Fluid dynamics
    Industrial applications

    ASJC Scopus subject areas

    • Mechanical Engineering
    • Industrial and Manufacturing Engineering

    これを引用

    Nonlinear vibration induced by the water-film whirl and whip in a sliding bearing rotor system. / Zhai, Liming; Luo, Yongyao; Wang, Zhengwei; Kitauchi, Seishiro; Miyagawa, Kazuyoshi.

    :: Chinese Journal of Mechanical Engineering (English Edition), 巻 29, 番号 2, 01.03.2016, p. 260-270.

    研究成果: Article

    @article{5658c72764bf46cbb2afdddadc96ba99,
    title = "Nonlinear vibration induced by the water-film whirl and whip in a sliding bearing rotor system",
    abstract = "Many industrial applications and experiments have shown that sliding bearings often experience fluid film whip due to nonlinear fluid film forces which can cause rotor-stator rub-impact failures. The oil-film whips have attracted many studies while the water-film whips in the water lubricated sliding bearing have been little researched with the mechanism still an open problem. The dynamic fluid film forces in a water sliding bearing are investigated numerically with rotational, whirling and squeezing motions of the journal using a nonlinear model to identify the relationships between the three motions. Rotor speed-up and slow-down experiments are then conducted with the rotor system supported by a water lubricated sliding bearing to induce the water-film whirl/whip and verify the relationship. The experimental results show that the vibrations of the journal alternated between increasing and decreasing rather than continuously increasing as the rotational speed increased to twice the first critical speed, which can be explained well by the nonlinear model. The radial growth rate of the whirl motion greatly affects the whirl frequency of the journal and is responsible for the frequency lock in the water-film whip. Further analysis shows that increasing the lubricating water flow rate changes the water-film whirl/whip characteristics, reduces the first critical speed, advances the time when significant water-film whirling motion occurs, and also increases the vibration amplitude at the bearing center which may lead to the rotor-stator rub-impact. The study gives the insight into the water-film whirl and whip in the water lubricated sliding bearing.",
    keywords = "Nonlinear, Rotor system, Sliding bearing, Vibration, Water-film whip",
    author = "Liming Zhai and Yongyao Luo and Zhengwei Wang and Seishiro Kitauchi and Kazuyoshi Miyagawa",
    year = "2016",
    month = "3",
    day = "1",
    doi = "10.3901/CJME.2015.0713.092",
    language = "English",
    volume = "29",
    pages = "260--270",
    journal = "Chinese Journal of Mechanical Engineering (English Edition)",
    issn = "1000-9345",
    publisher = "Chinese Mechanical Engineering Society",
    number = "2",

    }

    TY - JOUR

    T1 - Nonlinear vibration induced by the water-film whirl and whip in a sliding bearing rotor system

    AU - Zhai, Liming

    AU - Luo, Yongyao

    AU - Wang, Zhengwei

    AU - Kitauchi, Seishiro

    AU - Miyagawa, Kazuyoshi

    PY - 2016/3/1

    Y1 - 2016/3/1

    N2 - Many industrial applications and experiments have shown that sliding bearings often experience fluid film whip due to nonlinear fluid film forces which can cause rotor-stator rub-impact failures. The oil-film whips have attracted many studies while the water-film whips in the water lubricated sliding bearing have been little researched with the mechanism still an open problem. The dynamic fluid film forces in a water sliding bearing are investigated numerically with rotational, whirling and squeezing motions of the journal using a nonlinear model to identify the relationships between the three motions. Rotor speed-up and slow-down experiments are then conducted with the rotor system supported by a water lubricated sliding bearing to induce the water-film whirl/whip and verify the relationship. The experimental results show that the vibrations of the journal alternated between increasing and decreasing rather than continuously increasing as the rotational speed increased to twice the first critical speed, which can be explained well by the nonlinear model. The radial growth rate of the whirl motion greatly affects the whirl frequency of the journal and is responsible for the frequency lock in the water-film whip. Further analysis shows that increasing the lubricating water flow rate changes the water-film whirl/whip characteristics, reduces the first critical speed, advances the time when significant water-film whirling motion occurs, and also increases the vibration amplitude at the bearing center which may lead to the rotor-stator rub-impact. The study gives the insight into the water-film whirl and whip in the water lubricated sliding bearing.

    AB - Many industrial applications and experiments have shown that sliding bearings often experience fluid film whip due to nonlinear fluid film forces which can cause rotor-stator rub-impact failures. The oil-film whips have attracted many studies while the water-film whips in the water lubricated sliding bearing have been little researched with the mechanism still an open problem. The dynamic fluid film forces in a water sliding bearing are investigated numerically with rotational, whirling and squeezing motions of the journal using a nonlinear model to identify the relationships between the three motions. Rotor speed-up and slow-down experiments are then conducted with the rotor system supported by a water lubricated sliding bearing to induce the water-film whirl/whip and verify the relationship. The experimental results show that the vibrations of the journal alternated between increasing and decreasing rather than continuously increasing as the rotational speed increased to twice the first critical speed, which can be explained well by the nonlinear model. The radial growth rate of the whirl motion greatly affects the whirl frequency of the journal and is responsible for the frequency lock in the water-film whip. Further analysis shows that increasing the lubricating water flow rate changes the water-film whirl/whip characteristics, reduces the first critical speed, advances the time when significant water-film whirling motion occurs, and also increases the vibration amplitude at the bearing center which may lead to the rotor-stator rub-impact. The study gives the insight into the water-film whirl and whip in the water lubricated sliding bearing.

    KW - Nonlinear

    KW - Rotor system

    KW - Sliding bearing

    KW - Vibration

    KW - Water-film whip

    UR - http://www.scopus.com/inward/record.url?scp=84962708690&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=84962708690&partnerID=8YFLogxK

    U2 - 10.3901/CJME.2015.0713.092

    DO - 10.3901/CJME.2015.0713.092

    M3 - Article

    AN - SCOPUS:84962708690

    VL - 29

    SP - 260

    EP - 270

    JO - Chinese Journal of Mechanical Engineering (English Edition)

    JF - Chinese Journal of Mechanical Engineering (English Edition)

    SN - 1000-9345

    IS - 2

    ER -