Novel method to measure emission rate of VOCs - Emission of Formaldehyde

Shunta Nakamura*, Hoon Kim, Shin Ichi Tanabe

*この研究の対応する著者

研究成果: Paper査読

抄録

JIS (Japanese Industrial Standards) A 1901, a small chamber method, was established in January 2003 for the precise measurement of volatile organic compound (VOC) emission. JIS A 1902-2, a method for sampling, preparation of test specimens, and test conditions for adhesives using glass plates, was revised in December 2006. However, this method cannot be used for adhesives because this specimen is different from actual construction. Therefore, a new measurement method has been developed using a calcium silicate board (CSB) [1] for VOC emissions from adhesives. In this study, we measured the formaldehyde emission rate from four types of species to understand the actual conditions. Next, the formaldehyde emissions were measured using both CSB and stainless steel (SUS, a JIS standard) by the small chamber method. The VOC emission rates from two types of adhesives, B (vinyl acetate based resin emulsion) and W (ethylene vinyl acetate copolymer emulsion based adhesive), were measured by the small chamber method using CSB and SUS with added formaldehyde in the range 0.001-0.03 wt%. CSB was found to be more suitable than SUS to measure formaldehyde emission rate.

本文言語English
ページ103-108
ページ数6
出版ステータスPublished - 2014 1 1
イベント13th International Conference on Indoor Air Quality and Climate, Indoor Air 2014 - Hong Kong, Hong Kong
継続期間: 2014 7 72014 7 12

Conference

Conference13th International Conference on Indoor Air Quality and Climate, Indoor Air 2014
国/地域Hong Kong
CityHong Kong
Period14/7/714/7/12

ASJC Scopus subject areas

  • 汚染
  • 建築および建設
  • 健康、毒物学および変異誘発
  • コンピュータ サイエンスの応用

フィンガープリント

「Novel method to measure emission rate of VOCs - Emission of Formaldehyde」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル