Numerical Analysis of Stirling Engine: (2nd Report, Difference of Working Gas and Test Condition of Temperature)

Hiroshi Sekiya, Ryouichi Katouno

研究成果: Article査読

抄録

In the first paper, we presented the cycle simulation code of the Stirling engine, which was useful for researching and developing NS 30 S by virtue of predictions and evaluations. It was found that the calculated values of the engine performance and the P-V diagram were in good agreement with the experimental ones. In this paper, a comparative study of the engine performance in the case of using helium and hydrogen as the working gas is made from the viewpoint of thermophysical properties. By clarifying the characteristics of heat transfer and flow rate, the effects of heater tube temperature and cooling water temperature are investigated. In addition, the calculated results are inspected in comparison with the experimental ones concerning the test condition of temperature.

本文言語English
ページ(範囲)1194-1201
ページ数8
ジャーナルTransactions of the Japan Society of Mechanical Engineers Series B
57
535
DOI
出版ステータスPublished - 1991
外部発表はい

ASJC Scopus subject areas

  • 凝縮系物理学
  • 機械工学

フィンガープリント

「Numerical Analysis of Stirling Engine: (2nd Report, Difference of Working Gas and Test Condition of Temperature)」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル